XZENT X-422 software update (Version 1.3) primarily focuses on improving smartphone connectivity and system stability. Key Improvements in v1.3 Smartphone Integration
: Updated the "EasyConnect" (PhoneLink) connection to support Android OS 10 General Stability
: Enhancements to the MainSystem software to ensure smoother operation. System Language : Text corrections for Czech and Polish languages. Update Requirements To perform the update, you will need: Storage Medium
: A USB flash drive or MicroSD card with a maximum capacity of formatted to FAT32. Crucial Note
use your original navigation SD card for the software update, as this may corrupt your map data. Installation Process (Overview) X-422_Update_v1.3.exe file from the XZENT Support Archive
: Run the file on a PC to extract the update files directly onto your USB/SD card.
: With the device off, insert the media into the X-422. Turn the device on and follow the on-screen prompts. The process typically takes about Completion
To update your XZENT X-422 infotainment system, you need to download the official firmware from the manufacturer and install it via a USB flash drive.
Updates typically improve system stability, fix software bugs, and enhance compatibility with HDMI or Bluetooth devices. 🛠️ Preparation Checklist
USB Flash Drive: Minimum 2GB (max 32GB), formatted to FAT32.
Power Supply: Keep the engine running or use a stable external power source. Do not turn off the device during the process.
Current Version: Check your current software in Setup > Others > Software Version. 📥 How to Download and Install Visit Official Site: Go to the XZENT Download Section.
Download Files: Download the latest firmware ZIP file (e.g., v3.4).
Extract: Unzip the folder and copy all files directly to the root directory of your USB drive. Connect: Plug the USB drive into the X-422's USB-1 port. Start Update: Go to Setup > Others > Software Update. Confirm the update request. The device will restart and show a progress bar.
Completion: Once finished, the device restarts. Remove the USB drive immediately. ⚠️ Critical Warnings
Data Loss: Updating usually resets your radio presets and saved settings.
USB Port: Use USB-1. The system may not recognize the update on the USB-2/HDMI extension.
Format: If the update isn't detected, re-format your USB drive to FAT32 on a PC (not a Mac, as hidden files can cause errors). 🔍 Trouble Shooting Possible Cause Update not found Wrong USB port Ensure drive is in USB-1. Stuck at 0% Corrupted files Redownload and re-extract the ZIP. "No File" Error Ensure files are in the root, not inside a folder.
If you tell me your current software version or the specific issue you're having (like Bluetooth pairing or screen freezing), I can tell you if the latest update specifically fixes that problem!
A major point of confusion is map updates.
Let me know your experiences below – and if you have a clean download link, share the version number and source.
Drive safe, and enjoy your Xzent 🎵
Technical Overview: XZENT X-422 Software Update The XZENT X-422
is a 2-DIN infotainer that relies on periodic software updates to maintain smartphone compatibility and system stability. The latest significant system update for this model is v1.3, which was primarily released to provide Android 10 support for the "EasyConnect" (PhoneLink) feature. Key Update Information Latest Version: v1.3.
Primary Enhancement: Improved Android smartphone connectivity, specifically adding support for Android OS 10.
Update Duration: Approximately 5 minutes (excluding preparation).
Required Hardware: A USB drive or microSD card with a maximum capacity of 8 GB, formatted to FAT32. Update Procedures The update process for the XZENT X-422
is split into two distinct categories: main system firmware and navigation map data. 1. System Firmware (Main System & MCU)
System updates are downloaded as self-extracting .exe files from the XZENT Product Archive. xzent x-422 software update
Preparation: Run the downloaded file on a PC to extract the update files to the root directory of your USB/SD medium. Installation:
Turn off the device and insert the prepared medium into USB Port 1 (do not use Port 2).
Power on the head unit. The update will automatically begin in two stages: first deleting old applications, then copying new ones. A progress bar will show the MCU update status.
Caution: Do not turn off power or disconnect the medium until the "Update Complete" message appears. Remove the medium and press "OK" to restart. 2. Navigation Map Updates
Navigation software (X-MAP22FEU or X-MAP22FEU-MH) is not part of the standard system firmware and is managed separately.
Platform: Map updates are handled through the Naviextras Shop-Portal.
Toolbox: Users must download and install the Naviextras Toolbox on a Windows PC to sync new map data to the device's original navigation microSD card. Process
: Insert the original nav card into the PC, run the Toolbox, and download available free or paid updates before reinserting it into the Troubleshooting and Best Practices
Virus Scanners: PC security software may flag the self-extracting update files as threats; XZENT advises temporarily deactivating scanners during extraction if files are being quarantined.
Medium Selection: If the update fails to trigger, try a different brand or size of USB drive (still keeping under 8GB).
Post-Update: It is often recommended to perform a factory reset in the system settings after a successful update to ensure all new configurations take effect. Software Update Manual X-422 v1.3 - XZENT
The latest available software update for the XZENT X-422 is version 1.3, which was released to improve smartphone compatibility and overall system stability. Because this model is now considered an older product, its updates are located in the XZENT Product Archive rather than the main support page. 🛠️ Key Update Information Current Version: v1.3 Release Date: July 12, 2020
Major Fix: Updated "EasyConnect" (PhoneLink) to support Android OS 10. Update Duration: Approximately 5 minutes. 📥 Preparation & Equipment
You will need specific hardware to perform the update. Do not use the original navigation microSD card for this process, as it could corrupt your maps.
Storage Media: A USB flash drive or MicroSD card with a maximum capacity of 8 GB. Format: The drive must be formatted to FAT32.
Download: Get the X-422_Update_v1.3.exe file from the Official Archive.
Extraction: Run the .exe file on your PC to extract the update files directly to the root directory of your USB/SD card. 🚀 Installation Steps
Power Off: Ensure the head unit is turned off before starting. Connect Media:
Plug the USB drive into USB port 1 (the second port should remain empty) or insert the prepared MicroSD card. Start Unit: Turn on the . The system should automatically detect the update.
Automatic Sequence: The device will run two updates in a row—first deleting old applications and then copying new ones.
MCU Update: After the progress bar reaches 100%, the unit will restart and perform the MCU (Microcontroller Unit) update.
Completion: Once the update is finished, a confirmation note will appear. Remove the media before pressing "OK" to prevent the update from looping. 🗺️ Navigation Map Updates
If you specifically need to update the GPS maps, this is handled separately from the system firmware: Tool: Use the Naviextras Toolbox software on a Windows PC. Process: Remove the map microSD card from the
, connect it to your PC, and use the Toolbox to check for available map packages or free updates. To ensure I give you the best advice, could you tell me:
Are you experiencing a specific bug (like a smartphone connection error)?
What current version is listed in your device's "Version Information" settings? Software updates - XZENT
Keep Your Xzent X-422 Current: A Complete Guide to Software Updates
The Xzent X-422 is a powerhouse of an infotainment system, known for its sleek 2-DIN design and seamless smartphone integration. But like any high-end multimedia receiver, its performance relies heavily on its firmware. Keeping your software up to date ensures you have the latest bug fixes, better device compatibility, and the smoothest user interface possible. XZENT X-422 software update (Version 1
If you’ve noticed slight lags or want to ensure your system is ready for the latest smartphone OS updates, here is everything you need to know about the Xzent X-422 software update process. Why Update Your Xzent X-422?
Software updates aren't just about new features; they are about stability. For the X-422, updates typically address:
Smartphone Compatibility: Improved stability for Android Auto and Apple CarPlay (via HDMI/Wifi).
Bluetooth Connectivity: Faster pairing and fixes for audio streaming drops.
System Speed: Optimization of the touch response and menu transitions.
Bug Fixes: Resolving known issues with radio reception or playback from USB media. Pre-Update Checklist
Before you begin, you’ll need a few essentials to avoid "bricking" your unit:
A USB Flash Drive: Use a high-quality brand (8GB to 32GB). Format it to FAT32.
A Stable Power Source: Ensure your vehicle’s battery is healthy. Do not turn off the engine or the device during the update process.
The Correct Files: Always download firmware directly from the official Xzent website to ensure you have the specific version for the X-422. Step-by-Step Installation Guide 1. Download and Prepare
Visit the Xzent Support area. Locate the X-422 model and download the latest firmware package (usually a .zip file). Extract the contents directly to the root directory of your formatted USB drive. There should be no folders—just the update files. 2. Connect the Media
Start your car's engine to ensure a constant power supply. Insert the USB drive into the Xzent X-422’s USB port (usually located on the rear pigtail or via a dash-mounted extension). 3. Initiate the Update Navigate to:Setup > System > Software Update
The system will prompt you to confirm the update. Once you tap "Yes" or "OK," the unit will reboot and enter the update mode. 4. Wait for Completion
A progress bar will appear. This usually takes between 3 to 10 minutes. The screen might flicker or go dark momentarily; this is normal. Do not touch the unit or remove the USB drive until the system completely reboots back to the main menu. 5. Factory Reset (Crucial Step)
To ensure the new software settles correctly without residual data conflicts, perform a factory reset:Setup > System > Factory Install/ResetNote: This will erase your saved radio stations and EQ settings, so jot them down beforehand. Troubleshooting Common Issues
USB Not Recognized: Ensure the drive is FAT32. Some "High Speed" USB 3.0/3.1 drives are occasionally incompatible; try an older USB 2.0 drive if you run into trouble.
Update Fails at 0%: Double-check that the files are in the root directory and not inside a folder.
Screen Freezes: If the unit hangs for more than 20 minutes, contact an authorized Xzent dealer. Do not pull the power unless absolutely necessary. Final Thoughts
The Xzent X-422 remains a top choice for car enthusiasts who value a clean UI and reliable performance. By spending 15 minutes on a software update, you protect your investment and ensure your drives remain glitch-free.
Upgrading your XZENT X-422 Infotainment System ensures you have the latest bug fixes, improved smartphone compatibility, and smoother interface performance. This guide covers everything you need to know about the update process. 🛠️ Preparation Checklist Before starting, gather these items: USB Flash Drive: Minimum 8GB, formatted to FAT32. Stable PC: Windows or Mac to download and unzip files.
Battery Power: Ensure your vehicle has a steady power supply (keep the engine running). 📥 Step 1: Downloading the Firmware Visit the official XZENT Support website. Navigate to the Software Updates section. Locate the X-422 model. Download the latest ZIP file package.
Extract the files directly to the root directory of your USB drive. ⚙️ Step 2: The Installation Process Boot the Unit: Turn on your XZENT X-422. Insert USB: Plug the drive into the primary USB port. Enter Setup: Go to Setup > Other > Software Update. Confirm Update: Tap the confirmation button when prompted. Wait: The system will reboot and show a progress bar.
Do Not turn off the ignition or remove the USB during this time. 🔄 Step 3: Post-Update Reset
Once the update finishes, it is highly recommended to perform a Factory Reset: Navigate to Setup > System > Factory Reset.
This clears temporary cache files and prevents software glitches.
Note: This will erase your saved radio stations and Bluetooth pairings. ⚠️ Important Safety Tips
Check Version: Verify your current version in "System Info" first.
Quality Media: Use a high-quality USB stick to avoid data corruption. A major point of confusion is map updates
File Structure: Do not put the update files inside folders on the USB. ❓ Troubleshooting Common Issues
Update Not Recognized: Ensure the USB is formatted to FAT32, not NTFS or exFAT.
Freeze During Install: If the progress bar stops for over 20 minutes, contact XZENT support; do not force a restart unless instructed.
Bluetooth Errors: Re-pair your phone from scratch after the factory reset.
The latest official software for the XZENT X-422 , released to improve smartphone connectivity and system stability . Since this model is now part of the XZENT Product Archive
, you will not find it on the main support page for current models. Key Improvements in v1.3 Android OS 10 Support:
Updates the "EasyConnect" (Hewei PhoneLink) function to ensure compatibility with newer Android versions. System Stability:
General fixes for smoother operation of the main application and MCU (Micro Controller Unit). Update Preparation Obtain the X-422_Update_v1.3.exe from the official XZENT Support Archive
The file is a self-extracting archive. Run it on your PC and extract the contents to the root directory of a FAT32 formatted USB flash drive (max 8GB).
Note: If your virus scanner flags the file, it is usually a false positive due to the Windows CE binary format.
use the original navigation microSD card for this update, as it may corrupt your map data. Installation Steps The process takes approximately Turn off the X-422 unit. Connect the prepared USB drive to the USB-1 port at the back of the device.
Power on the unit. The update will start automatically and proceed through two stages: APP Update: Deletes old applications and copies new ones. MCU Update:
A second progress bar will appear to update the system controller. Once the "Update Successful" screen appears, remove the USB drive before pressing "OK" to prevent the update from restarting. Verification After the restart, go to Settings > System to verify the following versions: Simplefied Version: N8_87_20180712_01 EasyConnect: 2020.06.30-4155 navigation map updates , these are handled separately via the Naviextras Toolbox using your navigation microSD card. direct download link for the v1.3 firmware or instructions for the Naviextras map toolbox Software Update Manual X-422 v1.3 - XZENT
The most recent main system software update for the XZENT X-422
, which was released on July 12, 2020. This model is currently categorized under XZENT's Product Archive
, as it is an older device replaced by newer models like the X-427. Core Software Update (v1.3)
The v1.3 update primarily focuses on maintaining compatibility with newer smartphone operating systems and fixing specific device functions. Key Improvement:
Updates the "EasyConnect" (Hewei PhoneLink) Android smartphone connection to support Android OS 10 Release Date: July 12, 2020. Availability: Accessible via the official XZENT Product Archive Installation Prerequisites A USB drive or Micro SD card with a maximum capacity of Safety Warning:
use the original SAT NAV micro SD card for system software installations. File Format: The update file ( X-422_Update_v1.3.exe
) is a self-extracting ZIP archive. It should be extracted directly to the root directory of your FAT32 formatted data carrier. Step-by-Step Update Procedure The entire process takes approximately (APP and MCU components combined). Preparation: Download the v1.3 executable from the XZENT Support Page
Run the file on a PC and "Browse" to your USB drive/SD card to extract all folders directly to the disk. Hardware Connection: Ensure the powered off Insert the USB drive into USB port 1
(the second port should remain empty during this process) or insert the prepared SD card. Execution:
Power on the head unit. The system will automatically begin two consecutive updates. APP Update: Deletes old applications and copies new ones to the unit. MCU Update: Follows immediately with its own progress bar. Finalization: Once a completion message appears, remove the data carrier pressing "OK" to avoid the update restarting automatically. Verify the update by checking the version information in Settings > System Navigation Map Updates
Separate from the system firmware, navigation map updates are handled via the Naviextras Shop-Portal Tool Required: You must download and install the Naviextras Toolbox software on a Windows PC.
Insert the original navigation microSD card into your PC. The Toolbox will scan for available map updates or content associated with your map subscription. It is highly recommended to create a backup copy
The Xzent X-422 runs on a specific architecture where the navigation core is separate from the "Apps" section.
.zip or .rar containing:
⚠️ Warning: Do not use firmware from X-422C, X-423, or other models – it may brick your unit.
When the update finishes, the unit will boot to the home screen. Wait an additional 2 minutes for background processes to finish. Remove the USB drive and restart the engine one final time to clear the volatile memory.
If you are updating specifically to use the "Apps" feature (like using your phone with the Xzent Connect app), the update process is functional but limited.