Tvzt-3010-03up Led May 2026

Visually inspect the TVZT-3010-03UP strip. Look for:

Use a multimeter in diode mode. A working LED will light up dimly (or show ~2.7V drop). A dead LED shows open-loop (OL).

A: Likely a cold solder joint. Reflow the pads with flux. Alternatively, the LED driver is going into protection mode due to a short elsewhere in the string. tvzt-3010-03up led

Materials needed:

Steps:

Typical specifications (based on similar TVZT-series datasheets) are as follows:

| Parameter | Value (Typical) | Unit | |-----------|----------------|------| | Forward Voltage (Vf) | 2.8 – 3.2 | V | | Forward Current (If) | 20 – 30 | mA | | Peak Pulsed Current | 100 | mA | | Luminous Flux | 6 – 10 | lm (at 20mA) | | Color Temperature Options | 2700K – 6500K | K | | Viewing Angle | 120° – 140° | degrees | Visually inspect the TVZT-3010-03UP strip

The wide viewing angle makes it suitable for diffused lighting, while the relatively high luminous efficacy (over 100 lm/W in cool white bins) ensures good energy efficiency.