Tvs Rp 3160 Star Driver Installation Upd Today

Device Manager → Controller Properties → Driver tab → Roll Back Driver (only available if previous driver still stored).

pnputil /add-driver C:\Drivers\TVS_RP3160\tvsrp3160.inf /install

Then reboot.

Cause: Your POS software (like SAP, Oracle Micros, or goFrugal) is looking for a specific printer name. Fix: Rename the printer in Windows settings to exactly what the POS software expects (e.g., RP3160_KOT). Also, ensure the software is set to use "Windows Driver" mode, not "Raw TCP/IP."

A common source of confusion for TVS RP 3160 users is distinguishing between a Driver and a Firmware. tvs rp 3160 star driver installation upd

If you have performed a TVS RP 3160 Star Driver installation update but your printer still cuts paper halfway through a line, or the Ethernet port drops packets, you need a Firmware update, not a driver update.

To update firmware:

If the Star Driver requires USB/RS232/RS485 communication for configuration: Device Manager → Controller Properties → Driver tab

Verify installation: Open Device Manager → Look for "TVS RP 3160 Star Driver" under Ports (COM & LPT) or USB devices.

Warning: Many third-party "driver download" sites embed malware. Use only these sources:

Current latest stable version (as of this article): TVS Star Driver v3.2.5 for Windows, v1.8 for Linux (CUPS).

Note: Always update firmware after driver update, not before. Then reboot

Step 1: Backup current configuration
Use TVS Config Tool to save all motor parameters (current, microsteps, idle current).

Step 2: Download update file
Visit official TVS support → Downloads → RP Series → "RP 3160 Star Driver Firmware vX.X".

Step 3: Enter update mode

Step 4: Apply update

Step 5: Verify update