| Pin | Signal | Wire Color | Description | |-----|--------|------------|-------------| | C1 | SCV+ | Yellow | Suction control valve (fuel rail pressure) + | | C2 | SCV- | White | Suction control valve - | | C6 | PCV | Black/White | EGR valve position sensor | | C8 | VNT | Red/Black | Variable nozzle turbo actuator | | C12 | GLOW1 | Orange/Black | Glow plug relay control | | C13 | GLOW2 | Orange | Glow plug indicator light |
| Pin | Signal | Wire Color | Description | |-----|--------|------------|-------------| | D3 | CANH | White | CAN bus high (diagnostics) | | D4 | CANL | White/Black | CAN bus low | | D7 | SIL | Violet | K-line diagnostic (ISO 9141) | | D11 | IMMO+ | Light Green/Black | Immobilizer transponder communication | | D14 | W | Red/Yellow | Check engine light (MIL) | | D16 | STA | Black/White | Starter signal input | toyota 2kd-ftv ecu pinout diagram
This connector keeps the ECU alive.
| Pin | Wire Color | Signal | Description / Voltage | | :--- | :--- | :--- | :--- | | A1 | White | E2 | ECU Ground (Power) | | A2 | White/Black | E1 | ECU Ground (Sensor Reference) | | A3 | Red | BATT | Permanent +12V (Memory & Clock) | | A4 | Black/Yellow | +B | Main Relay Power (+12V via EFI relay) | | A6 | Black/Orange | MREL | Main Relay Control (ECU switches ground) | | A17 | Black/White | E01 | Injector Driver Ground (High current) | | A18 | Black | E02 | Injector Driver Ground (High current) | | A24 | Blue/Red | VCP | 5V Sensor Supply Output | | Pin | Signal | Wire Color |