?

3D Twisty 3x3 Cube Puzzle Simulator

Play with the online cube simulator on your computer or on your mobile phone.

Drag the pieces to make a face rotation or outside the cube to rotate the puzzle.

Apply a random scramble or go to full screen with the buttons.

➤ Online Solver
×
Error messages will be shown when a cube is not scrambled properly.
Solution:
?

Rubik's Cube Solver

Calculate the solution for a scrambled cube puzzle in only 20 steps.

Set up the scramble pattern, press the Solve button and follow the instructions.

Use the color picker, apply an algorithm or use a random scramble.

➤ Stopwatch
?

Cube Timer

Measure your solution times on your journey of becoming a speedcuber!

Use your Space button or click the clock to start and stop the cube timer.

With scramble generator and instant statistics calculator.

➤ Tutorial

How to Solve the Cube Puzzle?

The beginner's solution guide with images and easy to follow instructions.

Knowing how to solve a colored twisty 3x3 cube puzzle, like the Rubik's Cube is an impressive skill, and with a bit of patience, it’s easier to learn than you might think. You'll soon discover that solving it doesn’t require genius, just determination and practice!

In this tutorial we are going to use the easiest layer-by-layer method.

💡
It's advised to watch the attached video tutorial while using this cheat sheet explaining each step.
1

White Edges

Let's start with the white face. Try to form a white plus sign on the top of the cube, making sure that the colors of the side stickers also match the colors of the lateral centers. This step shouldn't be too hard. First, try to do it without reading the examples below, taking the time to familiarize yourself with the puzzle.

white edges correct way

We can easily insert the edge to the top if you move it to the highlighted bottom-front spot first. Depending on where the white sticker is facing do the rotations.

insert first edge
Case A:
White sticker facing down:		 F F
Case B:
White sticker facing  you:		 D R F' R'

Case C:
When the white edge is stuck between two solved edges you can send it to the bottom layer doing this:

L D L'

face rotation lettersI used capital letters to mark the clockwise face rotations: F (front), R (right), L (left), U (up), D (down).

Turns in the opposite direction are marked with an apostrophe. (')

Examples Next Step
2

Finish The White Face

solve cube white cornersWhen the white edges are solved we can move on to solve the white corners.

First, place the white corner corresponding to the position marked by the upper arrow into one of the highlighted spots. Next, repeat the algorithm below until the white piece comes to its desired destination.

R' D' R D

This trick sends the piece back and forth between the top and bottom locations, solved white facetwisting the corner in each step. Using this trick you can solve each white corner in less than 6 iterations.

At the end your cube should have a solid white face with the lateral stickers matching the lateral centers.

Examples Next Step
3

Center Layer

Turn your cube upside down because we don't need to work with the white face anymore.

We have a trick to insert an edge piece from the top-front position to the middle layer. Do the "Left" or "Right" algorithm depending on which side you have to insert the piece:

how to do center layer

Left:  U' L' U L U F U' F'
Right:  U R U' R' U' F' U F

solved center layerWhen a center layer piece is in its correct position, but oriented incorrectly then use the same algorithm to take it out, inserting another piece to replace it temporarily.

You'll have two solved layers when you finish this stage.
We're almost there.

More Cases Next Step
Ad
4

Yellow Cross

Inspect the top of your cube. You will see either a dot, an L-shape, a line or a yellow cross. Our goal is to form a yellow cross and we have a trick to go from one state to the other:

how to solve the twisty 3d puzzle rubiks cube

F R U R' U' F'

Use this algorithm to shift from one shape to the next one.

Shortcut Next Step
5

Swap Edges

We have a yellow cross on the top but the edges are not in their final position yet. They need to match the side colors.

swap rubiks cube edges

R U R' U R U U R' U

Use these steps to swap the front and left yellow edges in the top layer.

Next Step
6

Cycle Corners

Only the yellow corners are left unsolved at this point. Now we are going to put them in their final position and we'll rotate them in the last step.

Use the algorithm below to cycle the pieces in the direction marked with the arrows while the top-right-front piece is standing still.

cycle rubik cube puzzle algorithm
U R U' L' U R' U' L
Next Step
7

Orient Corners

Everything is positioned, we just have to orient the yellow corners. We use the same algorithm that we used for solving the white corners in the second step:

R' D' R D

This step can be confusing for most people so read the explanation very carefully and do exactly what it says!

rotate pieces rubiks cube twisty puzzle solution1. Hold the cube in your hand having an unsolved yellow corner in the highlighted top-right-front position.
2. Repeat the algorithm until this piece is solved.
3. Turn the top layer to bring another unsolved piece in the highlighted position.
4. Repeat R' D' R D until that one is also solved.
5. Do 3 and 4 for any other unsolved yellow corner.

Important!
⚠️ During the process it might seem that you have messed up the whole cube but don't worry because it will come together if you do it correctly, following the instructions.
⚠️ Always complete the whole R' D' R D algorithm, even if you see the yellow sticker pointing up. You still have to make a final D turn.

Examples Video
+

Video Tutorial

Watch these steps being explained in this video:

First Step
➤ Back to top

Sun50iw9p1 Firmware Today

First, a nomenclature clarification. "Sun50iw9p1" is Allwinner’s internal engineering codename for the Allwinner H6 SoC.

When we talk about "sun50iw9p1 firmware," we are not referring to a single file. We are referring to a boot stack—a chain of proprietary binaries and open-source loaders that transform a piece of silicon into a functional computer.

Safety tips:

For advanced users, the sunxi-tools package offers granular control: sun50iw9p1 firmware

sudo sunxi-fel ver  # Checks connection
sudo sunxi-fel write 0x2000 uboot.bin
sudo sunxi-fel write 0x40000000 kernel.img

A complete firmware package for sun50iw9p1 contains:

| Component | File example | Purpose | |-----------|--------------|---------| | Boot0 | boot0_sun50iw9p1.bin | First-stage loader (SRAM) | | U-Boot | u-boot.bin | Second-stage loader (DRAM) | | Trusted Firmware (optional) | bl31.bin | ARM TrustZone for secure world | | Kernel | Image or zImage | Linux kernel (Device Tree: sun50iw9p1.dtb) | | Root filesystem | rootfs.ext4 or initrd | System userspace (Buildroot, OpenWrt, Yocto) | | Vendor partitions | bootlogo.bmp, env.cfg | Splash screen, boot arguments |

On Android builds, you’ll also see boot.img, system.img, vendor.img, and dtbo.img. First, a nomenclature clarification

Before attempting any flash, back up your original firmware. You need a serial connection and sunxi-fel:

# Backup NAND to PC
sunxi-fel read 0x20000000 0x80000000 nand_backup.bin
# Backup SPI flash (if present)
sunxi-fel spiflash-info
sunxi-fel spiflash-read 0 0x800000 spibackup.bin

Store these .bin files safely. They are your rescue parachute.

The firmware for Allwinner’s sun50iw9p1 is a carefully layered system – from the immutable BROM through boot0, U‑Boot, and finally the Linux kernel. Understanding each stage is essential for embedded developers building set‑top boxes, retro gaming consoles, or custom IoT devices. With tools like FEL and the linux‑sunxi community, you have full control to bring this versatile SoC to life. When we talk about "sun50iw9p1 firmware," we are

Further reading: linux-sunxi.org – Hardware manuals and boot process details.

The BROM loads a tiny piece of code (max 32KB) called the SPL. Its job is to initialize the DRAM controller (a notoriously complex task on the H6) and load the next stage.