| Issue | Solution | |-------|----------| | Error persists after reset | Physical waste ink pads are saturated. Open printer and clean/replace pads or install external waste tank. | | WIC Utility doesn't detect printer | Install Epson driver first. Use USB, not Wi-Fi. Disable antivirus temporarily. | | Lights blinking alternately (service required) | You must reset waste ink counter (Method 1). | | Printer says "Parts inside printer at end of service life" | Same as above – reset counter or replace pads. |
Este es el escenario más crítico. Si la impresora muestra el mensaje "Parts inside your printer are at the end of their service life", el contador interno de las almohadillas de desecho está saturado.
Para modelos recientes como la L1250, las herramientas genéricas (como el viejo "AdjProg") suelen ser incompatibles. Se requiere la herramienta oficial o versiones crackeadas específicas del WIC Reset Utility o Epison Adjustment Program diseñadas para la serie L.
Este es el procedimiento oficial y seguro soportado por Epson. No requiere software externo.
This is the standard way for technicians.
Step 1: Download the tool
Step 2: Prepare the printer
Step 3: Run the reset
✅ The error should be gone.
Síntomas: La luz de tinta parpadea o está fija en rojo, aunque los tanques estén llenos. Solución: Mantener presionado el botón de Cancelar/Color o el botón de Tinta durante 3 a 5 segundos. La impresora comenzará a cargar tinta sola. Este es el método oficial de Epson.
Resetting the counter repeatedly without maintaining the waste ink pads will eventually damage your printer (ink spills inside, stains prints, ruins electronics). If you reset more than 3 times, consider installing an external waste ink tank (available on Amazon/eBay for ~$10).
To reset an Epson L1250 Go to product viewer dialog for this item.
, you typically need to address either the network settings (to fix Wi-Fi issues) or the waste ink pad counter (to fix "Service Required" errors where red lights blink alternately). 1. Resetting Network (Wi-Fi) Settings This is the standard factory reset for connectivity issues. Turn off the printer. resetear epson l1250
Hold down the Network Status button (the icon with a small "i" or network symbol).
While holding that button, press the Power button until the Wi-Fi and Wi-Fi Direct lights flash alternately.
Release both buttons. The network settings are now restored to factory defaults. 2. Resetting the Waste Ink Pad Counter
If your printer shows a "Service Required" message or the ink and paper lights blink alternately, the internal waste ink counter has reached its limit. To fix this, you must use a software "resetter".
Option A: Using the Epson Adjustment Program (AdjProg)This is often available for free but may be flagged by antivirus software. Preparation: Connect the printer to your PC via USB cable.
Disable Antivirus: Temporarily turn off real-time protection to allow the program to run. Run Program: Open AdjProg.exe and click Select. Choose the model and click OK. | Issue | Solution | |-------|----------| | Error
Maintenance Mode: Click Particular Adjustment Mode, then find Waste Ink Pad Counter under the Maintenance tab.
Initialize: Check the boxes for "Main pad counter" and "Platen pad counter." Click Check to see the status, then click Initialize to reset them to zero. Restart: Turn the printer off and back on when prompted.
Option B: Using WIC Reset UtilityA more user-friendly but typically paid option.
Download and install the WIC Reset Utility from the official WIC site. Connect your printer via USB. Purchase a Reset Key online.
Click Reset Waste Counters in the app, enter your key, and restart the printer. 3. Clearing Stuck Print Jobs
If the "reset" is for a printer that won't stop printing or has a stuck queue: How to Reset Epson L1250 with Resetter Este es el escenario más crítico
Síntomas: Las luces parpadean en un patrón específico (por ejemplo, luz de tinta y luz de papel intermitentes juntas) o el software te avisa: "The printer’s service life is over. Please contact Epson support." Solución: Usar software externo (como el AdjProg o WIC Reset) o el método de códigos de servicio.
Atención: Este segundo tipo es por el cual la mayoría busca "resetear epson l1250".
