The Reset Epson L380-L382-L383-L385-L485-L386 Adjustment Program is an essential tool for any budget-conscious printer owner. It transforms a "dead" printer back into a fully functional device in less than five minutes.
Remember the golden rules:
By following this guide, you can avoid expensive repair shops and keep your EcoTank printing for thousands of pages more. If you found this article helpful, bookmark it – you will likely need to perform this reset again in 6 to 12 months. Reset Epson L380-l382-l383-l385-l485-l386 Adjustment Program
Ready to fix your printer? Proceed to Step 1 – download the tool safely, and say goodbye to the "Service Required" error forever.
Disclaimer: This guide is for educational purposes only. Modifying your printer’s firmware counters may void your warranty. The author is not responsible for any physical ink leakage or damage resulting from resetting the counter without inspecting the waste pad. By following this guide, you can avoid expensive
Here’s a useful, structured post on the Epson L380/L382/L383/L385/L485/L386 Adjustment Program — including what it is, why you need it, how to get it, and step-by-step usage.
Warning: The L385 and L386 have the pad deeper inside. Search for a model-specific disassembly video before attempting. Disclaimer: This guide is for educational purposes only
| Step | Action | |------|--------| | 1 | In the menu, select “Waste ink pad counter” | | 2 | Click “OK” to read current counter values | | 3 | Check boxes: “Main pad counter” and “Ink absorber counter” | | 4 | Click “Initialization” (or “Reset”) | | 5 | Confirm warning dialog – click “Yes” |
| Error | Solution | |-------|----------| | “Communication error” | Use USB 2.0 port, disable firewall, reinstall printer driver. | | “Check model name” | Select correct model in program; ensure printer is not in error state (red lights blinking). | | “Reset failed” | Run program as Admin, disable antivirus, restart PC and printer. | | Printer not detected | Enter Maintenance mode: Hold “Stop” + “Power” → release Power but hold Stop → press Power once → release Stop. |
Some versions of the tool are locked to specific regional firmware. Search for "Epson Adjustment Program v2.0.0" or "v1.3.0" for older models.