Select your language
Select your language
For advanced users. If the jumper fails or your board has no jumper, use a USB-to-TTL serial adapter (like PL2303 or FTDI).
Process:
Best for: DVRs without email setup.
This method is widely considered the top choice by installers because it retains all recordings.
Forgot your Raysharp DVR password? Follow these top 3 reset methods — using security questions, the reset file, or contacting support. No data loss if done right.
The RaySharp DVR password reset process is straightforward using the GUID file method. Always try the security questions first, then escalate to the USB reset file. Avoid factory reset unless absolutely necessary, as you’ll lose all custom settings.
Need official support? Visit [raysharp.net] (example) or contact your local distributor with your DVR’s serial number.
Best for: DVRs with physical access and no internet.
⚠️ Warning: This erases all users, network settings, and schedules — but recordings usually stay intact.
Forgetting a DVR password is a common hurdle for security system owners. If you are using a RaySharp-based system (which includes many rebranded units like Lorex, Zosi, Storm, or Night Owl), there are several reliable ways to regain access. Method 1: Try Default Credentials First
Before attempting a hard reset, try the standard default login credentials for RaySharp systems: Username: admin Password: 123456, 12345, admin, or leave it blank. Method 2: Use a "Super Password" Generator
RaySharp DVRs often support a "Super Password" that is generated based on the device's system date or MAC address.
Note the Date: Look at the date and time currently displayed on your DVR’s monitor.
Use an App/Tool: Use a tool like the CCTV Super Password App or the Superadmin.exe tool.
Generate Code: Input the date (e.g., YYYYMMDD) into the generator to receive a temporary password.
Login: Enter the generated code into the DVR to unlock the system and set a new password.
To reset a Raysharp DVR password, the most reliable "top-rated" methods involve using a Super Password generator "Forgot Password" interface on the device itself. Google Play 🛠️ Top Methods for Raysharp Password Reset Super Password App CCTV Super Password app (4.0 rating on Select "RaySharp" from the manufacturer list. serial number The app generates a temporary code to unlock the system. System "Forgot Password" : Many Raysharp models have a built-in recovery tool. At the login screen, click "Forgot Password" A serial number will appear on the screen. Use a generator tool (like GenSuperPassword.exe
) or a mobile app to get a temporary key based on that serial. Default Credentials : If the unit has been factory reset, try the default admin / admin admin / (blank) Physical Reset : Some units have a small reset button on the internal motherboard (PCB).
: This requires opening the case and will wipe all settings and recorded data. 🛡️ Important Security Note Older Raysharp firmware is known to have vulnerabilities , including hardcoded root passwords ( TCP port 23 Once reset, immediately change the password to something unique. remote access if not needed to prevent unauthorized entry. If you can tell me the model number of your Raysharp DVR or the current date/serial number
displayed on your login screen, I can help you find the specific super password for your unit. CCTV Super Password - App Store
To reset the password on a RaySharp DVR, you can use several methods ranging from software tools and mobile apps to physical hardware resets. Method 1: Using "CCTV Super Password" App raysharp+dvr+password+reset+top
This is often the most convenient method for RaySharp and other H.264-based DVRs.
Download: Install the CCTV Super Password app from the Google Play Store. Generate Code: Open the app and select RaySharp from the supported brands.
Enter the Serial Number or the Date currently displayed on your DVR screen. The app will generate a "Super Password."
Login: Enter this generated code into the DVR login screen to unlock the system and set a new password. Method 2: Physical Hardware Reset
If software methods fail, you can manually reset the device to factory defaults.
Reset Button: Locate a small physical button or pinhole on the back or bottom of the DVR. Press and hold it for 10–30 seconds while the device is powering on. CMOS Battery Removal: Disconnect the power and open the DVR casing.
Carefully remove the small silver coin battery (CMOS battery) from the motherboard for several minutes.
Reinsert the battery and power the DVR back on. The date and time should reset, which may also clear the admin password. Method 3: QR Code & Email Recovery
Modern RaySharp-based systems (often rebranded as SPRO or Elite) use QR code recovery. CCTV Super Password - Apps on Google Play
Finding yourself locked out of your RaySharp DVR can be frustrating, but there are several reliable ways to regain access. Depending on your specific model and firmware, the solution typically involves using a master password generator, a hardware reset, or a remote configuration tool. Primary Password Reset Methods
Default Credentials: Before trying complex resets, check the factory defaults. Common initial passwords for RaySharp and its rebranded units (like Floureon or Zmodo) include 123456, 000000, 111111, or simply leaving the password field blank.
Super Password Generators: Many RaySharp units use a date-based "Super Password." You can find tools online or apps that generate a one-time code based on the current date displayed on your DVR's monitor.
Hardware Reset Button: Look inside the DVR casing on the motherboard for a small "Reset" button or two solder pads labeled "TP" or "Reset." Holding these for 15–30 seconds while powering the unit on can often trigger a factory reset.
Battery Removal: Removing the CMOS battery (the silver coin cell) for a few minutes will reset the system clock to a factory date (often 01/01/2000). This allows you to use a known default super password associated with that specific date. Remote and Software Tools
Network Scanning: If the DVR is on your network, security researchers have noted that certain modules, like those in the Rapid7 database, can sometimes retrieve or bypass credentials remotely if the firmware is older.
Manufacturer Support: For newer "Cyber-Secure" or high-end models, you may need to use a dedicated mobile app to select a "Forgot Device Password" option, which sends a reset code to your registered email.
For a visual walkthrough on how to perform these resets on RaySharp and similar CCTV systems, watch this guide:
Losing the password to your Raysharp DVR can be frustrating, but there are several ways to regain access, ranging from using default factory codes to performing a hardware reset. 1. Try Common Default Passwords
Before attempting a full reset, check if your device is still using one of the common Raysharp factory default (Leave blank) (Often used for admin access) 2. Use the "Forgot Password" QR Code
Most modern Raysharp and related firmware (like Storm or Lorex) use a QR code recovery "Forgot Password" on the login screen. should appear on the monitor. For advanced users
Scan this code with the manufacturer’s mobile app or take a photo and email it to the Raysharp Support Team support@raysharp.cn They will send you a temporary security code to unlock the unit. 安联锐视 3. Hardware Reset (Battery Removal)
If software methods fail, you can try a physical reset to clear the internal clock and stored settings: the DVR and unplug it. Open the casing and locate the CMOS button battery (CR2032) on the motherboard. Remove the battery carefully for 2–5 minutes. Reinsert the battery and power the unit back on. On some older models, this resets the system date to 01-01-2000
. Try logging in with the default passwords mentioned above. 4. Direct Technical Support
If none of the above work, contact the manufacturer directly with your model number serial number (usually found on a sticker on the bottom of the device): Official Website: Raysharp Support support@raysharp.cn obd@raysharp.cn Global Phone: +86-756-8598259 安联锐视 Do you have the specific model number of your DVR?
This could help identify a more precise reset button location or master code. Contact us - Raysharp
> Contact us. Tel: +86-756-8598259. Fax: +86-756-8598235. E-mail: 安联锐视 Technology Center - Support
After-sales service contact. Telephone:400-6211-999. 0756-6869002. E-mail:support@raysharp.cn. 安联锐视 Zhuhai RaySharp Technology Co., Ltd
To reset a Raysharp DVR password, you typically need to use a dynamic password generated by the system's date or a specialized "Super Password" tool. 🛠️ Common Reset Methods 1. The Date-Based "Super Password"
Most Raysharp units (and their rebranded versions like Night Owl or Lorex) use a mathematical algorithm based on the current date displayed on the DVR monitor.
Identify the Date: Look at the date shown on your DVR's live view (e.g., 04-26-2026).
Generate Code: Use a "Super Password" generator tool (often found online as "Raysharp Password Reset").
Input: Enter the generated 6 or 8-digit code into the login window. 2. Default Credentials
If the DVR has been factory reset or is brand new, try these common defaults: User: admin Password: (Leave Blank), 12345, 123456, or 000000. 3. Hardware Reset (Internal)
If software methods fail, you may need to access the motherboard: Power Down: Unplug the unit. Open Case: Remove the screws to see the board. Locate Jumper: Look for pins labeled TP5, J1, or RESET.
Short the Pins: Use a screwdriver to bridge these pins while powering the unit back on for 15–30 seconds. 4. QR Code / GUID Recovery
Newer models often have a "Forgot Password" button on the login screen:
QR Code: Scan the code with the mobile app (like XMEye or Raysharp's proprietary app).
Email: If you linked an email during setup, a security code will be sent there. ⚠️ Important Considerations
Rebranded Units: Raysharp is an Original Equipment Manufacturer (OEM). Your DVR might say Night Owl, Q-See, or Kguard, but the internal software is Raysharp.
Security Risk: Because these "Super Passwords" are well-known, ensure you change your password to something strong immediately after gaining access. Generate a super password or reset file → save to USB
Firmware Variations: Some 2024+ models have removed the date-based backdoor for better security, requiring a technician's XML file export.
If you can provide a few more details, I can give you the exact steps for your specific device:
What is the brand name on the box (e.g., Night Owl, Lorex, generic)? What date is currently showing on the DVR screen?
Do you see a "Forgot Password" button or a QR code on the login page?
I can then help you generate the code or find the specific manual for that model.
Raysharp DVR Password Reset: The Ultimate Recovery Guide Losing the password to your surveillance system can be a major security headache. If you are locked out of your Raysharp DVR, getting back into your system is essential for maintaining your property’s safety. This guide covers the top methods to reset your Raysharp DVR password, ranging from simple default codes to technical hardware resets. 1. Try Universal Default Passwords
Before attempting more complex reset methods, always try the factory default credentials. Many Raysharp units (and the various brands they manufacture for, such as Lorex, Night Owl, or Q-See) ship with standard logins. Common Default User: admin Common Default Passwords: (Leave the password field blank) 12345 123456 888888 000000 admin 2. Using the Security Question or Email Recovery
Modern Raysharp DVRs often feature a self-service password recovery option during the initial setup. Click the "Forgot Password" link on the login screen.
If you previously configured Security Questions, answer them correctly to be prompted for a new password.
If you linked an Email Address, the system will generate a dynamic QR code or a "Verify Code" button. Scan the code with the system's mobile app (like RXCamView or XMEye) to receive a temporary reset key in your inbox. 3. The Super Password Generator (Date-Based)
For older Raysharp firmware, the system often uses a "Super Password" based on the current date displayed on the DVR screen.
How it works: Third-party "Super Password" generators or specialized mobile apps can calculate a master code if you provide the year, month, and day shown on your DVR's monitor.
Example: If your DVR shows 2024-05-15, the generator creates a one-time code valid only for that specific day.
Note: Ensure your DVR's internal clock is accurate; if the battery died and it reset to 2000-01-01, use that date for the calculation. 4. Hardware Reset (Internal CMOS Battery)
If software methods fail, a hardware-level reset may be necessary. This requires opening the DVR casing, which may void your warranty. Power Down: Unplug the power cable from the DVR.
Remove the Battery: Open the cover and locate the small silver coin-cell battery (CR2032) on the motherboard. Remove it carefully.
Wait: Leave the battery out for 2–5 minutes. This clears the volatile memory (CMOS), often resetting the system clock and sometimes the password to factory defaults.
Reinsert and Boot: Put the battery back in, close the case, and power the unit on. Try the default passwords mentioned in Step 1. 5. Hard Reset Button or Jumper Pins
Some Raysharp motherboards have a dedicated physical reset mechanism.
Reset Button: Look for a tiny tactile button on the motherboard labeled "RESET." Hold it down for 15 seconds while powering the unit on.
Jumper Pins: Look for two pins labeled TP1, JP1, or J1. Using a flathead screwdriver or a jumper cap, short these two pins together while plugging in the power. Hold for 10 seconds, then release. Critical Security Tip
Once you successfully reset your password, change it immediately. Avoid using "123456" or "admin." Create a complex password and write it down in a secure location or use a password manager. Ensuring your firmware is up to date will also provide the latest security patches to prevent unauthorized access.