Raysharp Dvr Password Reset →
Modern Raysharp DVRs (models manufactured after 2018) use a proprietary cryptographic reset method. This is the safest method for a Raysharp DVR password reset without losing configuration.
Most RaySharp DVRs have a hidden reset button or jumper inside the case.
| Problem | Probable Cause | Solution |
| :--- | :--- | :--- |
| Forgot Password button does nothing | Firmware version < 3.0 | Use Hardware Jumper (Method 2) |
| Security code generator says "Invalid" | Time/Date on DVR is wrong | Sync DVR time via monitor > System > Date & Time, then retry |
| After jumper reset, password still fails | Default password differs by model | Try admin/(blank), admin/123456, 888888/888888 |
| DVR beeps constantly after reset | No cameras found | Re-add IP cameras via Camera Management > Search & Add |
| "Account Locked" message | Too many failed attempts | Unplug DVR for 30 minutes. Do not attempt again without correct method. | raysharp dvr password reset
| Model Series | Username | Password |
|--------------|----------|----------|
| Older 4/8/16 channel | admin | admin or 12345 |
| Some HD-TVI models | admin | (blank) |
| OEM rebrands (CP Plus, Zmodo, etc.) | admin | 123456 |
This is the standard recovery method for Raysharp DVRs running newer firmware (typically the 'X' series or models using the Raysharp CMS software interface). Modern Raysharp DVRs (models manufactured after 2018) use
What you need: A USB thumb drive (formatted to FAT32) and a Windows PC.
Before trying technical resets, try these quick checks to save time: Before trying technical resets, try these quick checks
123456 or adminadmin.If those didn't work, move on to the methods below.
If you have access to the web interface of your Raysharp DVR, you can reset your password using the following steps:
