Radio Set Hx Prc 6020 - Technical Data Install

The PRC-152A is the industry standard for multiband, multimission handheld radios. Unlike legacy single-band radios, this unit bridges the gap between traditional VHF line-of-sight (LOS) communications and modern SATCOM/Wideband networking. For technical teams, it offers significant advantages in data throughput and encryption, though it requires careful frequency management during installation.

The HX-PRC 6020 is a multiband, multimode tactical radio designed for manpack, vehicular, and fixed-station use. Below is the verified technical data sheet.

Step 1: Mounting Bracket

Step 2: Power Connection

Step 3: Antenna Cabling

Step 4: Radio Docking

Installation varies by environment: Manpack, Vehicular, or Fixed Station.

The HX PRC 6020 utilizes a modular architecture allowing for various mission profiles:

Using the HX-VPA-6020 (Vehicle Adapter Amplifier) is mandatory for 20W output. radio set hx prc 6020 technical data install

Step 1: Mount the Adapter Plate

Step 2: Connect DC Power

Step 3: Dock the Radio

Step 4: External Antenna (Critical)

Step 5: Final Check

Category: Multiband Handheld Radio (VHF/UHF/L-Band/SATCOM)

| Parameter | Value | |-----------|-------| | Frequency Stability | ±2.5 ppm (-30°C to +60°C) | | Channel Spacing | 25 kHz (or 12.5 kHz optional) | | Preset Channels | Up to 100 (user programmable) | | Operating Voltage | 12–15 V DC nominal (vehicle) / 10–16 V DC (battery pack) | | Battery Type | Li-Ion 14.4 V / 4.4 Ah (hot-swappable) | | Power Output | 5 W (low), 25 W (high, manpack); up to 50 W (vehicular amp) | | Receiver Sensitivity | -117 dBm (20 dB SINAD typical) | | Adjacent Channel Selectivity | ≥70 dB @ 25 kHz | | Audio Output | 1 W @ 8 Ω (internal speaker), 5 mW (headset) | | Duty Cycle | 10% transmit, 90% receive (manpack, 25W) | | Environmental | IP67 (dust/water immersion), MIL-STD-810H | | Operating Temp | -30°C to +60°C | | Dimensions (HX-PRC6020) | 260 × 95 × 45 mm (without battery) | | Weight | 2.4 kg (with battery) |