Planswift Earthwork Pro V3

Hand-calculating slope volumes (e.g., a 20-foot cut at 2:1 slope) is a nightmare of trigonometry. In v3, you simply click the top of the slope, enter the ratio, and the software extrudes the volume along your polyline. It automatically accounts for benching for safety or equipment access.

If your PDF plans only include spot elevations or 2D lines, v3 can interpolate. The software generates smooth, dynamic contour maps that update in real-time as you adjust grading plans. This feature is invaluable for redesigning slopes on the fly during a bid meeting.

First, it is crucial to clarify a frequent point of confusion. PlanSwift is a standalone digital takeoff and estimating platform. Earthwork Pro v3 is the third iteration of a premium plug-in or "add-on" specifically designed to bolt advanced 3D earthwork calculation capabilities onto the standard PlanSwift interface. planswift earthwork pro v3

Unlike the base version of PlanSwift, which excels at linear measurements (LF), area (SF), and count (EA), Earthwork Pro v3 unlocks the ability to perform grid-based and cross-section volume calculations directly from 2D PDF plans.

The mistake: You only measure the flat building pad. The fix: Use the "Slope Extension" tool. A 50,000 sq ft pad with a 2:1 slope surrounding it can add thousands of cubic yards of cut. Hand-calculating slope volumes (e

A major "gotcha" in earthwork estimation is compaction. When you dig dirt out, it expands (fluff). When you put it back, it compacts (shrinks).

Earthwork Pro v3 incorporates these math adjustments natively. Instead of applying a generic 10% factor across the entire job in a spreadsheet, the software allows you to apply different swell and shrink factors to different zones. This granular control is where estimators find their edge—shaving just enough off the bid to be competitive without assuming undue risk. A major "gotcha" in earthwork estimation is compaction

Why have thousands of civil contractors switched to v3? The answer lies in its feature set.

At its heart, Earthwork Pro v3 is not just measuring length and area; it is measuring change. The software’s signature feature is its dynamic cut-and-fill visualization. Users can import contour maps or CAD files, assign strata layers (topsoil, clay, rock), and watch as the system auto-calculates net import/export requirements in real time.

Key enhancements in v3 include:

Older methods required estimators to hand-draw grids on paper maps and manually calculate average depths. PlanSwift Earthwork Pro v3 automates this. You define a grid spacing (e.g., 50ft x 50ft), and the software extracts existing ground elevations via imported contour maps or point data. Then, you input proposed subgrade elevations. Within seconds, v3 computes the net volume for each cell.