ipmitool raw 0x06 0x08
ipmitool hpm upgrade <filename.ima>
Alternatively, use CPU-Z or HWInfo:
Warning: Do not use firmware for Rev 101 or Rev 103. They are electrically different.
After extracting the HP Softpaq (using 7-Zip or WinRAR), look for:
If you only have an .exe, extract it manually: spXXXXX.exe /e /f bios_files
Pegatron IPMIP-GS Rev 1.02 is an LGA1156 motherboard typically found in OEM systems (like Gateway, Acer, or POS terminals) from the early 2010s. Because it was produced for specific manufacturers, finding a "complete" retail manual is difficult, but key technical documentation remains available through community and archival sites. The Retro Web Core Hardware Specifications Socket & CPU
: LGA1156, supporting Intel Core i3, i5, and i7 processors (Clarkdale/Lynnfield architectures). : Intel H55 Express (PCH BD82H55). : 4x DDR3 DIMM slots. : 1x PCIe x16, 1x PCIe x1, and 2x PCI slots. : 6x SATA 3Gb/s ports. The Retro Web Critical Maintenance Procedures
The manual and layout guides emphasize two primary hardware reset functions: CMOS Reset (Clear BIOS Settings) Power off and unplug the computer.
Move the CMOS jumper cap to the "Clear" position for 5–10 seconds.
Return the cap to the default position before powering back on. Password Clear
Move the jumper to "Clear" and power on the machine to the POST screen.
Power down, return the jumper to its default position, and restart to access BIOS without a password. Reference Documents
You can find archival versions of the layout and block diagrams on these platforms: IPMIP-GS Rev 1.02 Manual - Scribd pegatron ipmipgs rev 102 manual upd
: Provides a layout summary, I/O descriptions, and specifications. Motherboard Block Diagram - Scribd
: Detailed 68-page technical schematic of component connections. Retro Web Database
: Includes driver lists and component datasheets like the Realtek ALC662 audio and Nuvoton super I/O chip. or a compatible CPU upgrade for this board? IPMIP-GS Rev 1.02 Motherboard Manual - Scribd
The Pegatron IPMIP-GS Rev 1.02 is a MicroATX motherboard designed for the Intel LGA1156 socket, primarily using the Intel H55 chipset. Because Pegatron is an OEM manufacturer, finding a dedicated official support page is difficult; however, detailed manual documentation and specifications are available through community archives and technical repositories. Manual & Documentation Downloads
You can find the full PDF manuals and layout guides at the following sources:
IPMIP-GS Rev 1.02 Full Manual (Scribd): Includes a specifications summary, motherboard layout, and internal connector guides.
IPMIP-GS Series Layout Guide (Direct PDF/FTP): A quick-start reference for pinouts and jumpers.
Technical Block Diagram (Scribd): A detailed 68-page document mapping component signals and power connections. Key Specifications
Socket/CPU: Intel LGA1156; officially supports Intel Core i3, i5, and i7 (Clarkdale). Chipset: Intel H55 (some variants support H57/Q57).
Memory: 4 DDR3 DIMM slots, Dual-channel support for 1066/1333 MHz, max capacity 16GB.
Expansion: 1x PCIe x16, 1x PCIe x4, 1x PCIe x1, and 1x standard PCI slot. Storage: 5x SATA 3Gb/s connectors and 1x eSATA port. BIOS & Update Procedures ipmitool raw 0x06 0x08 ipmitool hpm upgrade <filename
Updates for these boards are rare because Pegatron typically provides them to system integrators (like HP or DNS) rather than end-users.
Flash Override Jumper: To update the BIOS, you must move the FLASH_OVERRIDE (often labeled KBPWR) jumper from the default position to the "Flash" position (Pins 1-2) to disable write protection.
BIOS Tools: The board uses AMI BIOS. Users typically use the FPT (Flash Programming Tool) via a DOS-bootable USB to flash new firmware. Troubleshooting & Maintenance
Clear CMOS: Unplug the power cord, move the CMOS jumper cap to the "Clear" position for 5–10 seconds, then return it to the default position.
Clear BIOS Password: Move the jumper to "Clear," turn the PC on until the POST screen appears, turn it off, and move the jumper back. IPMIP-GS Rev 1.02 Motherboard Manual - Scribd
The Pegatron IPMIP-GS Rev 1.02 is a legacy microATX motherboard based on the Intel H55 Express chipset, originally released around 2010. It is commonly found in OEM desktop systems from manufacturers like HP and Inspur. Because it is an OEM component, finding a standard "manual" from a dedicated support site can be difficult; however, the following technical summary serves as a comprehensive reference for specifications, layout, and common updates. Technical Specifications Summary
The motherboard utilizes the LGA 1156 socket, which supports first-generation Intel Core processors. Chipset: Intel H55 Express (Ibex Peak).
CPU Support: Supports Intel Core i7, i5, and i3 series (specifically Clarkdale and Lynnfield architectures). Memory: Slots: 4 x 240-pin DDR3 DIMM slots. Maximum Capacity: Up to 16 GB.
Speed: Dual-channel DDR3 1066/1333 MHz (Non-ECC, unbuffered). Expansion Slots: 1 x PCI Express x16. 1 x PCI Express x4. 1 x PCI Express x1. 1 x Standard PCI slot. Storage: 5 x SATA 3Gb/s (SATA II) connectors.
Audio: Realtek ALC662 (6-channel) or ALC888S (8-channel) High Definition Audio. Networking: Gigabit Ethernet (Intel PHY). Motherboard Layout and Internal Connectors
When performing maintenance or a new build in a legacy chassis, these key internal connectors are essential: Alternatively, use CPU-Z or HWInfo:
Power Connectors: 1 x 24-pin ATX Main Power and 1 x 4-pin ATX 12V CPU power.
Fan Headers: 1 x CPU Fan connector and 1 x System (Chassis) Fan connector.
Front Panel: A standard 10-pin header for Power Switch, Reset Switch, Power LED, and HDD LED. Additional I/O:
Up to 5 internal USB 2.0 headers (supporting 10 additional ports). 1 x Front panel audio connector. 1 x Internal serial port (COM) connector. 1 x Clear CMOS jumper (usually labeled CLRTC or CLR_CMOS). Rear Panel Interface
The back I/O includes the following ports for peripheral connectivity:
Video Output: 1 x VGA (D-Sub), 1 x DVI-I, and 1 x HDMI (optional on some SKUs). USB: 4 x USB 2.0 ports.
Storage/Legacy: 1 x eSATA port, 1 x PS/2 Keyboard port, and 1 x PS/2 Mouse port.
Connectivity: 1 x RJ-45 LAN port and 6 audio jacks for multi-channel sound. BIOS and Driver Updates
Since this is an OEM board, updates are typically distributed by the system integrator (e.g., HP) rather than Pegatron directly. IPMIP-GS Rev 1.02 Motherboard Manual - Scribd
It looks like you're looking for a manual or update guide for a Pegatron IPMIPGS Rev: 1.02 board — likely a motherboard used in OEM systems (e.g., Acer, Packard Bell, or older desktops).
However, Pegatron does not publicly host end-user manuals for this specific revision on their official website. Here’s what you can do: