FullVideo
If your receiver cannot connect to the internet, or the network update fails, you can update using a USB thumb drive.
Step 1: Download the File
Step 2: Prepare the USB Drive
Step 3: Install on Receiver
Before downloading anything, note your existing version.
Now, check Onkyo’s official support page (or a trusted AV forum) to see if a newer version exists. As of April 2026, the last stable release for the HT-R695 is generally Version 1081-1010-0000-0010 (or newer—always verify via your region’s Onkyo site).
Here is the concise content regarding the Onkyo HT-R695 firmware update. onkyo ht-r695 firmware update
Note: The HT-R695 is the AV receiver unit from the Onkyo HT-S7800 home theater package. Do not look for updates under a generic "HT-R695" page; always use the HT-S7800 support page.
As of the last official Onkyo support cycle (pre-2021, when Onkyo Home Entertainment was restructured), the latest firmware version for the HT-R695 is:
If you just factory-reset the receiver or it’s a new setup: If your receiver cannot connect to the internet,
This is essentially a network update triggered earlier in the setup flow.
| Error Code | Meaning | Solution |
|------------|---------|----------|
| No Update | Already latest | No action needed |
| Error 0-01 | Network failure | Check Ethernet cable; restart router |
| Error 0-05 | Server timeout | Try again after 1 hour |
| Error 0-13 | Corrupt download | Switch to USB method |
Onkyo doesn’t release firmware for the HT-R695 as often as they do for flagship models, but the updates that exist are critical. Past updates have addressed: Step 2: Prepare the USB Drive
Warning: An interrupted firmware update can brick your receiver. Do not turn off the power or press any buttons once the process starts.
Note: Onkyo no longer issues new updates for the HT-R695 (end-of-life status). However, if you are on a very old version (e.g., 1081-8000-0000-0000), you should still apply the final available update.