Nokia Ta-1165 Firmware Pac File Download [FRESH • 2026]

If you want, I can:

The Nokia TA-1165 is the model variant for the Nokia C1. Because it uses a Spreadtrum (Unisoc) SC7731E chipset, the firmware is distributed as a .PAC file. 📂 Nokia TA-1165 Firmware Download

You can find the stock ROM (PAC file) through several community-tested sources. Note that HMD Global does not provide direct public links for these files; they are typically pulled from service tools.

Firmware Dump (Tested): SAROMs - Nokia C1 TA-1165 (Approx. 890MB) Google Drive Mirror: Nokia TA-1165 PAC File Alternative Link: AH Mobile Blogspot 🛠️ Flashing Requirements

Before you begin, ensure you have the following tools installed on your PC:

Flash Tool: Use the SPD Upgrade Tool or Research Download Tool.

USB Drivers: Install the Spreadtrum/Unisoc USB Drivers so your PC recognizes the device in "Download Mode". nokia ta-1165 firmware pac file download

Battery: Charge your phone to at least 50% to prevent it from dying during the process. 📖 How to Flash the .PAC File

Follow these steps to repair a dead boot, remove a forgotten password, or fix software hang issues: 1. Load the Firmware Launch the SPD Upgrade Tool. Click the Load Packet button (the single gear icon ⚙️).

Select your downloaded .pac file. Wait for it to load completely. 2. Prepare the Device Power Off your Nokia C1 completely.

Remove the battery if possible, then re-insert it (do not turn it on).

Locate the Boot Key: Usually Volume Up or Volume Down. On some TA-1165 units, you may need to use a Test Point (shorting a specific gold dot to ground) if the device is hard-bricked. 3. Start the Process

Click the Start Downloading button (the "Play" arrow icon ▶️). If you want, I can:

Hold the Boot Key and connect your phone to the PC via USB cable.

The tool should show a blue progress bar once it detects the device. Release the button only after flashing starts. 4. Verification Wait for the tool to show a green "Passed" message.

Disconnect the cable and power on your device. The first boot may take 5–10 minutes. ⚠️ Important Warnings

Data Loss: This process will wipe all user data, including photos and contacts.

FRP Lock: If you have a Google account synced, you will be asked for the credentials after the reset. If you've forgotten them, you may need an FRP Bypass tool.

Brick Risk: Flashing the wrong firmware version can permanently brick your hardware. Ensure your model is specifically TA-1165. I can provide more targeted help if you tell me: The Nokia TA-1165 is the model variant for the Nokia C1

Is your phone currently stuck on the logo, completely dead, or just locked? Do you have the USB drivers already installed on your PC?

Are you seeing a specific error code in the SPD tool (e.g., "FDL2 failed")?

  • In OST LA, click Start.
  • If an SRT key is requested, generate it using a compatible tool and your device’s IMEI (first IMEI on the box).
  • Wait for the flash to complete (green checkmark). Do not disconnect early.

    • 💡 For dead/unresponsive phones, use SP Flash Tool with a PAC-to-scatter converter (not recommended for beginners).

    Before discussing firmware, let's clarify the device. The Nokia TA-1165 is a regional variant of the Nokia 2.2, released in 2019. Key specifications include:

    The TA-1165 model number typically corresponds to devices sold in India, the Middle East, and Southeast Asia. Different regions (TA-1188, TA-1179) have different firmware. Using the wrong PAC file can irreversibly damage your phone.