| Issue | Solution | |-------|----------| | Driver installs but phone not detected | Use different USB port (USB 2.0 preferred) | | Error: “Driver not intended for this platform” | You have 32-bit driver. Get 64-bit version. | | COM port disappears after 1 second | Normal for PreLoader driver – it’s a boot driver. | | SP Flash Tool stuck at 0% | Reinstall driver in test mode + reboot both PC & phone |
Updated: October 2025 | Difficulty: Moderate | For: Windows 10/11 (64-bit)
If you have landed on this page, you are likely staring at a dead Nokia RM-1035 (commonly known as the Nokia Lumia 535) with a screen showing a spinning gear, a red triangle, or a device that refuses to boot past the Nokia logo. In the GSM service world, the Nokia RM-1035 MTK USB Driver (64 Bit) is the golden key to resurrection.
But finding the correct driver is a nightmare. Most forums host corrupted, 32-bit only, or signature-disabled drivers that fail on modern PCs. After testing 15 different driver packs from various GSM forums, we have isolated the BEST, most reliable 64-bit driver package for this MediaTek (MTK) based Lumia.
The keyword phrase typically points to a specific driver package required to connect the Nokia X/XY series (specifically the Nokia X Dual SIM, identified by RM-1035) to a Windows PC. Because this device runs on a MediaTek (MTK) chipset rather than a Nokia-specific proprietary OS, standard Nokia Suite drivers do not work. The "GSM Forum" context indicates this is a tool primarily used by mobile technicians for flashing, unlocking, and repairing, rather than general consumers for file transfer.
When you search Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum -BEST, you are likely preparing to use one of these tools. Our tested driver works with:
Warning: Do NOT use "SN Write Tool" or "Maui META" while the libusb driver is active. You must switch back to the standard "MTK USB COM" driver for those tools. Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum -BEST
You now have the best working MTK 64-bit driver for Nokia RM-1035. Ready for flashing, unlocking, or IMEI repair.
Installing the Nokia RM-1035 (Nokia 130) MTK USB drivers on a 64-bit Windows system is a common hurdle for mobile technicians using tools like Infinity BEST or Miracle Box. Because this device uses a MediaTek (MTK) chipset, Windows often fails to recognize it without manual driver intervention. Essential Pre-Installation Steps
Before installing, you must disable Driver Signature Enforcement on 64-bit versions of Windows (10 and 11). Without this, Windows will block the unsigned MTK drivers. Go to Settings > Update & Security > Recovery. Under Advanced startup, click Restart now.
Select Troubleshoot > Advanced options > Startup Settings > Restart.
Once the menu appears, press 7 or F7 to "Disable driver signature enforcement". Manual Installation Guide for Nokia RM-1035
Since these drivers often lack an executable installer, you must add them as "Legacy Hardware". | Issue | Solution | |-------|----------| | Driver
Step 1: Open Device ManagerRight-click the Start button and select Device Manager.
Step 2: Add Legacy HardwareClick on your computer name at the top of the list, then go to Action > Add legacy hardware.
Step 3: Select Driver FileChoose Install the hardware that I manually select from a list (Advanced). Select Show All Devices, then click Have Disk.
Step 4: Locate .inf FileBrowse to your extracted driver folder (often found on specialized forums like GSM Forum). Look for usb_vcom.inf or android_winusb.inf inside the 64-bit subfolder.
Step 5: FinalizeSelect MTK USB Port or MediaTek Preloader USB VCOM Port from the list and click Next to install. Common Troubleshooting
Device Disappearing: The MTK VCOM port only appears for a few seconds when the phone is first connected without a battery (or by holding the boot key). Code 10 Error Updated: October 2025 | Difficulty: Moderate | For:
: This typically means the driver signature enforcement was not disabled correctly before installation.
Hardware ID Matching: Ensure the driver supports the specific ID for , which is typically USB\VID_0421&PID_06FB. Compatible Flashing Tools
Once the drivers are correctly installed, you can use the following to flash or repair the how to install MTK VCOM USB Preloader Drivers
We do not host files directly, but the verified hash for the best 64-bit driver package for Nokia RM-1035 is:
Safest sources (as of 2025):
Avoid: Rapidgator, Uploaded.net, or any link that asks for a "premium subscription" for a free driver.