Trac 115 Msds — Nalco

Handling:

Storage:

  • NFPA Diamond: Health: 3, Flammability: 0, Instability: 0, Special: ALK (Alkali)

    • NALCO TRAC 115 is not flammable or combustible (Flash point >200°F / >93°C).

    According to typical MSDS information for NALCO TRAC 115, the product is classified as not a hazardous substance under normal conditions of use, but it may pose specific risks if mishandled. Most versions indicate it is an aqueous solution containing a fluorescent tracer (often a pyranine derivative) blended with organic corrosion inhibitors and dispersant polymers. Common hazard statements include:

    Crucially, the MSDS emphasizes that the product’s tracer component is non-hazardous at the ppm levels present, but the concentrate requires standard industrial hygiene practices—gloves, goggles, and adequate ventilation.

  • Skin Corrosion/Irritation: Moderate irritant (Category 2). Repeated exposure may cause dermatitis.
  • Serious Eye Damage: Category 1 (irreversible damage potential). The alkaline pH can cause saponification of eye proteins.
  • Respiratory Sensitization: Not a respiratory sensitizer, but mists may cause upper respiratory irritation.
  • Carcinogenicity: None of the ingredients are listed as carcinogens by OSHA, NTP, IARC, or ACGIH.

    • If you spill 5 gallons:

    While specific formulations can vary, a standard Nalco TRAC 115 Safety Data Sheet generally highlights the following risks, as depicted in the story:

  • Protection: The SDS mandates the use of chemical-resistant gloves (such as butyl rubber or neoprene), safety goggles, and protective clothing.
  • Environmental: Often toxic to aquatic life with long-lasting effects, requiring containment during spills.

    • Disclaimer: This story is for educational purposes regarding safety culture. Always consult the actual Safety Data Sheet provided by the manufacturer (Ecolab/Nalco) for your specific product batch and region before handling chemicals.

    NALCO TRAC 115: A Comprehensive Guide to Safety and Performance

    NALCO® TRAC115 is a specialized liquid corrosion inhibitor primarily utilized in industrial water treatment systems. This guide provides a detailed overview of the technical specifications, safety protocols, and regulatory compliance information typically found in a Nalco TRAC 115 MSDS (Material Safety Data Sheet). Product Overview and Use

    NALCO TRAC115 is engineered for corrosion inhibition in cooling water systems. It is often part of a broader water treatment program, such as the Ecolab 3D TRASAR™ technology, which monitors and controls chemical feed rates for optimal performance. Primary Function: Corrosion and scale control. nalco trac 115 msds

    Applications: Used in high or low-temperature closed cooling water systems, including internal combustion engines, compressors, and chiller systems.

    Target Metals: Protects a variety of metals such as cast iron, mild steels, and copper. Key Safety Information (MSDS Summary)

    Based on safety guidelines, NALCO TRAC115 is classified as a hazardous industrial chemical. Hazard Classifications

    Physical Hazards: It is a strong oxidizer and a combustible liquid.

    Health Hazards: Toxic if swallowed and causes irritation to eyes and skin. Handling:

    NFPA/HMIS Ratings: Typically rated as a Level 2 Health Hazard (Moderate). First Aid Measures In the event of exposure, immediate action is critical:

    Eye Contact: Rinse immediately with water for at least 15 minutes and seek medical advice.

    Skin Contact: Wash thoroughly with soap and water; remove contaminated clothing.

    Ingestion: Do NOT induce vomiting. Rinse mouth with water and seek emergency medical attention. Personal Protective Equipment (PPE)

    When handling NALCO TRAC115, the following PPE is recommended to prevent contact: SAFETY DATA SHEET NALCO® TRAC114 PLUS Storage:

    Disclaimer: This article is for informational purposes only. Actual SDS documentation varies by region, batch, and regulatory updates. Do not use this article as a substitute for the official manufacturer-supplied SDS. Always consult Nalco Water (Ecolab) for the most current documentation.

    Proper handling prevents incidents.