Before you begin, ensure you have the following items:
If you cannot find a Male-to-Male USB cable or if the USB method fails, you can try the SD Card method.
| Issue | Severity | Workaround |
|-------|----------|-------------|
| No Wi-Fi (wrong driver) | High | Reflash with correct Wi-Fi chipset version |
| Netflix / DRM apps crash | High | Use older Netflix v4.x APK |
| Audio sync issues | Medium | Use Kodi’s audio offset setting |
| Remote control buttons not mapped | Low | Edit Vendor_0001_Product_0001.kl file (root required) |
| 1GB RAM bottleneck | High | Use Lite versions of apps; no multitasking |
| No hardware video decoding in some apps | Medium | Use MX Player with SW decoder |
Warning: Installing firmware carries risk (bricking, data loss). Proceed only if you accept that risk. Back up important data and ensure the device has adequate power.
What this guide covers
Before you start (requirements)
Find the correct firmware (important)
Files and tools — download/install
Method A — Flash via Amlogic USB Burning Tool (recommended for full image)
Method B — Flash via SD card (update from recovery)
Post-install steps
Troubleshooting
Advanced recovery (serial TTL)
Legal & safety notes
If you want: I can provide
Related search suggestions (These are search-term suggestions to help refine downloads and troubleshooting.)
Upgrading an older MXQ Amlogic S805 Android 5.1.1 Lollipop can breathe new life into the device, allowing it to run newer apps like later versions of Kodi that require at least Android 5.0
. While the official firmware typically peaked at Android 4.4 KitKat, community-adapted ROMs allow for this leap. Prerequisites & Downloads mxq amlogic s805 android 511 lollipop download install
Before starting, ensure you have the following hardware and files:
: A full-size SD card (formatted to FAT32) and a thin object like a toothpick or paperclip for the reset button. TWRP Recovery
: Download the "all black SA5 TWRP" recovery image. Rename the file to recovery.img and place it on the root of your SD card. Lollipop Firmware : Download the Android 5.1.1 Lollipop
ZIP file (often referred to as "Abdul’s Lollipop" or adapted from the K1 mobile firmware) and copy it to the SD card. Historically, these files were hosted on the MXQ Project and related community forums. Compatibility
: This firmware is designed for "all-black" MXQ models (HD18Q or Q models) with 1GB of RAM
. It is generally not compatible with "Blink" versions (red stripe) or 512MB RAM models. Installation Guide (Toothpick Method)
The safest way to install the new OS is through a custom recovery like TWRP. Prepare the SD Card recovery.img and the firmware
file are both in the root directory of your FAT32-formatted SD card. Enter Recovery Mode Unplug the power cable from the MXQ box. Insert the SD card into the box. Locate the hidden reset button inside the on the back. Press and hold this button with a toothpick.
While holding the button, plug the power cable back in. Continue holding until the TWRP screen appears on your TV. Flash the Firmware In TWRP, it is highly recommended to select
and perform a factory reset (and wipe the system cache) to prevent boot loops. , navigate to your SD card, and select the Lollipop
Swipe to confirm the flash. This process can take several minutes. First Boot : Once complete, select Reboot System . The first boot can take up to 10 minutes ; it may stay on the splash screen for a significant time. Important Considerations Known Issues
: Some users report limited Wi-Fi driver support or shutdown issues with this unofficial port. Alternatives : If you primarily use the box for media, consider
as a dual-boot or standalone option. It is often faster and more stable than Android for Kodi users.
: Flashing firmware carries a risk of "bricking" the device. Ensure you have a backup of your original firmware or know how to use the Amlogic USB Burning Tool for a hard recovery if needed. as a safer alternative?
Upgrading an MXQ Amlogic S805 Android 5.1.1 Lollipop is a popular way to extend the life of older hardware, though it is typically achieved using unofficial firmwares originally designed for similar devices like the Minix Neo X6 Pre-Installation Requirements Amlogic USB Burning Tool
: Version 2.0.5 or 2.0.8 is often required, as newer versions may not properly recognize the S805 processor. MicroSD Card : Formatted to TWRP Recovery : A compatible recovery image (renamed to recovery.img ) to facilitate the installation. : Used to press the reset button hidden inside the Installation Steps (SD Card Method)
The MXQ Amlogic S805 is an older TV box originally built for Android 4.4 KitKat. Upgrading it to Android 5.1.1 Lollipop provides a "new lease of life" by allowing the device to run more modern applications, specifically newer versions of Kodi (up to 18.2 Leia) that were previously unsupported. Performance Review Before you begin, ensure you have the following items:
System Stability: The firmware is generally considered stable for standard tasks like streaming. It handles YouTube (up to 1080p) and Netflix well, and the interface remains responsive despite only having 1GB of RAM.
Sluggishness: Users may experience "sluggish" behavior during high-load tasks due to poor NAND flash performance. Boot times can exceed two minutes, and app loading can be slow.
Hardware Compatibility: This firmware is primarily designed for the HD and Q models of the MXQ. It is not expected to work on devices with only 512MB of RAM (like the Blink MXQ or M21D).
Known Issues: Common bugs include occasional shutdown problems and limited Wi-Fi driver support depending on your specific board variation. Installation Overview
Installing Lollipop on this hardware is a "tinkerer's" task and carries a risk of breaking the hardware if the firmware doesn't match your specific board version.
Disclaimer: Before proceeding, please note that installing a new firmware on your device can potentially brick it if done incorrectly. Make sure to follow the instructions carefully and backup your data.
Device Information:
Preparation:
Installation Methods:
There are two methods to install the firmware: using a USB cable and a computer (Method 1) or using a local update method (Method 2).
If you provide the WiFi chip name and PCB markings (e.g., “MXQ V3.1 20160826”), I can give you a direct download link to the exact firmware.
MXQ Amlogic S805 Android 5.1 Lollipop: A Comprehensive Guide to Download and Install
The MXQ Amlogic S805 is a popular Android TV box that has gained a significant following among tech enthusiasts and cord-cutters. This device is powered by the Amlogic S805 chipset, which provides a robust and efficient performance. One of the most significant advantages of the MXQ S805 is its ability to run Android 5.1 Lollipop, a versatile and feature-rich operating system. In this article, we will provide a step-by-step guide on how to download and install Android 5.1 Lollipop on your MXQ Amlogic S805 TV box.
Why Upgrade to Android 5.1 Lollipop?
Android 5.1 Lollipop is a significant upgrade over its predecessors, offering a range of exciting features and improvements. Some of the key benefits of running Android 5.1 Lollipop on your MXQ S805 include:
Preparation and Requirements
Before you begin the download and installation process, make sure you have the following: If you cannot find a Male-to-Male USB cable
Downloading the Android 5.1 Lollipop Firmware
The first step is to download the Android 5.1 Lollipop firmware for your MXQ Amlogic S805 TV box. You can download the firmware from the official MXQ website or other reputable sources. Here are the steps to follow:
Alternative Sources
If you are unable to find the firmware on the official MXQ website, you can try alternative sources, such as:
Creating a Bootable Installation Media
Once you have downloaded the firmware file, you need to create a bootable installation media using a USB drive. Here are the steps:
Installing Android 5.1 Lollipop on MXQ Amlogic S805
Now that you have created a bootable installation media, it's time to install Android 5.1 Lollipop on your MXQ Amlogic S805 TV box. Follow these steps:
Troubleshooting and Common Issues
During the installation process, you may encounter some issues. Here are some common problems and their solutions:
Conclusion
Upgrading your MXQ Amlogic S805 TV box to Android 5.1 Lollipop can breathe new life into your device, providing a range of exciting features and improvements. By following this comprehensive guide, you should be able to download and install Android 5.1 Lollipop on your device with ease. If you encounter any issues during the process, refer to the troubleshooting section or seek help from online forums and communities.
Additional Tips and Resources
By following this guide, you can enjoy the benefits of Android 5.1 Lollipop on your MXQ Amlogic S805 TV box and take your entertainment experience to the next level.
| Risk | Consequence | Mitigation | |------|-------------|-------------| | Wrong firmware | Boot loop, black screen, no Wi-Fi | Match PCB + Wi-Fi chip exactly | | Power loss during flash | Hard brick (requires NAND reprogramming) | Use stable power supply | | Corrupted download | Verification fail or boot hang | Check MD5 hash if provided | | Malware-infected firmware | Device joins botnet, steals data | Scan with Virustotal, use trusted sources |
Step 1 – Install drivers
Step 2 – Prepare box
Step 3 – Flash