Mxq Amlogic S805 Android 5.1.1 Lollipop Download May 2026

Once Android 5.1.1 loads, perform these tasks:

There are three primary scenarios where you will need to download and flash this firmware:

Note: Do not confuse the S805 with the newer S905, S905X, or S912 chips. Firmware for those will brick your S805 device.

While it is technically possible to download and flash an Android 5.1.1 Lollipop image for the MXQ Amlogic S805, doing so in 2026 is not recommended for daily use. The firmware is obsolete, insecure, and often unstable. If you must proceed, use the tools and warnings above, and verify your PCB revision and WiFi chip before flashing.

Final advice: Retire the MXQ S805 to retro emulation (Batocera Linux) or recycling. Modern TV sticks like the Fire TV Stick 4K or Chromecast with Google TV are vastly superior in every way.

Finding a stable Android 5.1.1 Lollipop firmware for the MXQ Amlogic S805

is a common request for users looking to breathe new life into older hardware

. Because this device was never officially updated to 5.1.1 by most manufacturers (most remained on 4.4.2), you must rely on community ports and "Frankenstein" builds. Key Firmware Options Custom K1 Port

: The most popular 5.1.1 build was originally designed for the and later adapted for the MXQ S805. Minix Neo X6 Hybrid

: Firmware from the Minix Neo X6 (which shares the S805 chip) is reported to work on some "All Black" MXQ variants when flashed using the Amlogic USB Burning Tool LibreELEC / AlexELEC (Alternative)

: If your goal is simply to run the latest version of Kodi, it is highly recommended to use

rather than Android 5.1.1. These lightweight operating systems run from an SD card and provide better performance and stability for media playback. Essential Download Links & Resources

You can find these files across community forums and specialized archives: MXQ Project Archive : Historically the go-to source for MXQ S805 Install Guides and firmware links. MediaBoxEnt Firmware Page : Hosts various builds, including the MXQ-PRO 4K 5.1 Lollipop Firmware (though ensure your board matches the RTL8188 Wi-Fi chip). Google Drive Community Mirror Lollipop 5.1.1 Full Download link managed by community members. Installation Guide (The "Toothpick" Method) Format your SD Card : Use a card formatted to Prepare Files : Copy the firmware recovery.img ) to the root of the card. The Boot Sequence Unplug the power. Insert the SD card. to press and hold the reset button located inside the

Plug in the power while still holding the button for 5–10 seconds. : In the recovery menu (TWRP), select (Cache/Data), then select and choose your firmware file.

There are dozens of MXQ S805 board variations (HD18Q, MXQ_S85, etc.). Using the wrong firmware can "brick" your device (make it unbootable). Always back up your current firmware using TWRP Recovery before attempting an upgrade. to ensure you pick the right firmware?

Flashing firmware carries a risk of "bricking" your device (rendering it unusable). The files linked in forums are often provided by third parties. Proceed at your own risk, and ensure you verify the firmware matches your specific hardware revision before flashing.

The MXQ S805 remains a classic example of the early "Android Box" era. While modern streaming has largely moved toward certified devices like Shield TV or Chromecast, the S805 platform—specifically running Android 5.1.1 Lollipop—represents a specific milestone in budget home media centers. The Hardware Foundation: Amlogic S805

The heart of the MXQ is the Amlogic S805, a quad-core Cortex-A5 processor clocked at 1.5GHz. By today’s standards, it is modest, but it was revolutionary for its time due to its native hardware decoding of H.265/HEVC. This allowed a very inexpensive device to play high-quality video files that would have stuttered on more expensive hardware lacking that specific codec support. The Software: Android 5.1.1 Lollipop

Most MXQ boxes originally shipped with Android 4.4 KitKat. Upgrading to Android 5.1.1 Lollipop was a significant leap for several reasons: ART Runtime: Mxq Amlogic S805 Android 5.1.1 Lollipop Download

The shift from Dalvik to ART (Android Runtime) improved app performance and system responsiveness. Material Design: The UI became cleaner and more consistent. API Support:

Lollipop opened the door for newer versions of Kodi (v16 and v17) which eventually dropped support for older Android versions. The "Download" and Firmware Ecosystem

Finding a "complete" download for this specific firmware today is an exercise in digital archaeology. Because the MXQ was produced by dozens of different generic factories, there is no single "official" website. Users typically look for SD card burning tools Amlogic USB Burning Tool However, there is a catch: Wi-Fi chips.

The most common frustration when downloading MXQ firmware is finding that the OS works, but the Wi-Fi does not. This is because different "batches" of the S805 used different wireless modules (like the Realtek RTL8723 or AP6212). Modern Utility: Is it worth it?

In the current landscape, an S805 running Android 5.1.1 faces challenges:

Lollipop is no longer receiving security patches, making it risky for logged-in Google accounts. App Compatibility:

Most major streaming apps (Netflix, Disney+) now require higher security levels (Widevine L1) and newer Android versions. The "LibreELEC" Alternative:

Many enthusiasts skip Android entirely. Because the S805 is well-documented, users often download

—lightweight Linux distributions that run Kodi directly from an SD card. This often results in a faster, smoother 1080p media experience than Android 5.1.1 can provide. Conclusion

The MXQ Amlogic S805 with Android 5.1.1 is a testament to the longevity of budget silicon. While the Android OS itself has aged out of mainstream utility, the hardware remains a capable, low-power tool for local media playback and retro-gaming emulation. For those looking to revive one, the key is not just finding a download, but identifying the specific board revision to ensure the drivers match the hardware. specific firmware files to unbrick a device, or are you interested in alternative operating systems like LibreELEC?

MXQ Amlogic S805 TV box originally launched with Android 4.4.2 KitKat

. While there is no official Android 5.1.1 Lollipop update from the manufacturer, various custom ROMs

and community ports—such as those originally built for the —allow users to upgrade to Android 5.1.1 Lollipop Key Specifications of MXQ S805 : Amlogic S805 Quad-Core Cortex-A5 @ 1.5GHz. : Quad-Core Mali-450. : 1GB RAM and 8GB NAND Flash storage. : Support for H.265/HEVC hardware decoding up to 1080p. Made-in-China.com Upgrade Options and Installation

The move to Android 5.1.1 is often sought to run newer versions of apps like Kodi (17+ Krypton)

, which are not compatible with the original KitKat firmware. Custom ROMs : Firmware created by developers like or ports from the Minix Neo X6 are commonly used to achieve Android 5.1. Installation Method Download the firmware (often in .zip format) and the TWRP recovery Copy files to a FAT32-formatted microSD card

Use the "toothpick method" (pressing the reset button inside the AV port) while powering on to enter recovery mode. Flash the firmware via TWRP. Alternative (Recommended) : Many users prefer

(Kodi-focused OS) over Android 5.1.1, as these are often more stable and provide better performance for media playback on this older hardware.

The MXQ Amlogic S805 typically ships with Android 4.4.2 KitKat as its official operating system. While there is no widely recognized official Android 5.1.1 Lollipop update from the manufacturer for this specific hardware, unofficial community-developed firmware exists to bridge the gap. Firmware Overview Once Android 5

Most MXQ S805 devices use a Quad-Core Cortex A5 processor with 1GB of RAM. Because official support largely ended with KitKat, users seeking Lollipop (Android 5.1.1) must rely on ported firmware.

Ported Versions: Popular unofficial Lollipop builds were originally developed for similar hardware, such as the K1 box or Minix Neo X6, and adapted for MXQ boards.

Compatibility Issues: There are many variations of MXQ motherboards (e.g., "All Black," HD18q); firmware that works on one may not work on another, potentially causing issues with Wi-Fi drivers or even "bricking" the device. Installation Methods

Updating an older S805 box usually requires manual flashing rather than a standard "Over-the-Air" (OTA) update.

The MXQ Amlogic S805 is a legacy Android TV box that originally launched with Android 4.4 KitKat. While custom Android 5.1.1 Lollipop firmware exists, it is an unofficial community effort—often adapted from hardware like the K1 smartphone—rather than an official manufacturer release. Hardware Overview Processor: Amlogic S805 Quad-Core ARM Cortex A5 (1.5 GHz). GPU: Quad-Core Mali-450. Memory: Typically 1GB DDR3 RAM and 8GB NAND flash storage.

Connectivity: 10/100M Ethernet, 2.4GHz Wi-Fi, and 4x USB 2.0 ports.

Video: Supports up to 1080p resolution and H.265 hardware decoding. Software & Lollipop Update Performance

Updating this device to Android 5.1.1 is primarily a project for enthusiasts rather than casual users.

The MXQ Amlogic S805 is a classic Android TV box known for its budget-friendly entry into home media centers. While it originally shipped with Android 4.4 KitKat, many users seek to upgrade to Android 5.1.1 Lollipop to improve app compatibility and system performance. Hardware Overview The

is powered by a quad-core processor and was a popular choice for running early versions of Kodi. Chipset: Amlogic S805 Quad-Core (Cortex-A5). GPU: Quad-Core Mali-450. RAM: 1GB DDR3. Storage: 8GB NAND Flash. Resolution Support: Up to 1080P hardware decoding. Android 5.1.1 Lollipop Upgrade Official firmware for the

often capped at Android 4.4, but custom ROMs have enabled the jump to 5.1.1.

Firmware Source: Modified versions originally built for devices like the K1 or Minix Neo X6 have been adapted for the .

Improvements: Upgrading to Lollipop provides a more modern interface and allows for better compatibility with newer streaming applications that no longer support KitKat. How to Install the Upgrade

Upgrading this device typically requires manual flashing using the "toothpick method" to enter recovery mode.

For the MXQ Amlogic S805 TV box, upgrading to Android 5.1.1 Lollipop

typically requires using custom ROMs, as the device originally shipped with Android 4.4 KitKat. Firmware Downloads & Custom ROMs

Because the S805 chip is older, most Lollipop builds are community-developed "custom ROMs" rather than official manufacturer updates. MXQ Lollipop 5.1.1 by

: A popular custom ROM based on the 3.10.33 kernel specifically for S805 devices. Minix Neo X6 Firmware Note: Do not confuse the S805 with the

: Some users have successfully ported Android 5.1 firmware from the Minix Neo X6 to work on MXQ S805 hardware. Alternative OS : If you only need a media center, many users opt for

, which run Kodi 17 or 18 more efficiently on this hardware than Android. Installation Methods There are two primary ways to flash this firmware: SD Card Method (OTA)

Unzip the firmware files to the root of a FAT32-formatted Micro SD card. Use a toothpick to press the reset button inside the AV port while plugging in the power.

The device should enter recovery mode and begin the update automatically. Amlogic USB Burning Tool Requires a PC and a USB Male-to-Male

firmware file into the tool and connect the box while holding the reset button. Google Groups Important Precautions

Run the installer as Administrator. During installation, ensure you check the box for "Install WorldCup Driver." Restart your PC.

The FreakTab community is the gold standard for TV box firmware.

Q: Can I upgrade from Android 5.1.1 to 6.0 or 7.0 on my S805? A: No. The S805 lacks the necessary ARMv8 architecture for Android 6.0+. Attempting to flash newer firmware will brick the device.

Q: My box uses Android 4.4.2. Should I upgrade to this Lollipop? A: Yes, but with caution. Lollipop is heavier on RAM (needs 1GB minimum). If you have a 512MB box, stay on KitKat.

Q: The download link is dead. What do I do? A: Use the Wayback Machine (archive.org) to retrieve old blog posts, or post a request on the FreakTab forum with your PCB photo.

Q: Does this firmware include Google Play Store? A: Yes. All stock MXQ Lollipop builds include Google Play Services and the Play Store.

Ready to restore your MXQ S805? Bookmark this guide, double-check your PCB version, and only download firmware from trusted sources like FreakTab or Chinagadgetsreviews. A correctly flashed Android 5.1.1 Lollipop will turn your bricked box back into a functional media streamer.

Disclaimer: Flashing firmware carries inherent risk. The author is not responsible for bricked devices. Always back up your original firmware using the USB Burning Tool's "Export" function first.

The MXQ Amlogic S805, which natively runs Android 4.4.2, can be updated to Android 5.1.1 Lollipop through unofficial, ported firmware. Installation involves flashing the device using an SD card or the Amlogic USB Burning Tool, with caution required regarding specific hardware variations. For guides and downloads, see the tutorial at YouTube.

Here’s a helpful feature guide for the MXQ Amlogic S805 Android 5.1.1 Lollipop firmware download and installation — structured for clarity and ease of use.

There are two ways to connect, depending on the state of your box:

Method A: USB Cable (Recommended)

Method B: Recovery Mode (If Method A fails)