Ms-7613 Ver 1.1 Motherboard: Manual
Q: Can I use this board with Windows 10?
Manual answer (implied): No official drivers for G41 IGP beyond Vista. But community solutions exist: use the “Snappy Driver Installer” for G41 chipset drivers. A discrete GPU is recommended.
Q: Why does my CPU run at lower multiplier?
Manual answer (p. 35): SpeedStep (EIST) reduces multiplier when idle. Disable in BIOS > Cell Menu > Intel EIST if benchmarking.
Q: Where is the CMOS battery?
Manual answer (p. 10): CR2032 battery located adjacent to the PCIe slot, below the ICH7 heatsink.
Q: Does this board support Core 2 Extreme?
Manual answer: Yes – QX6850, QX6800, but only with BIOS v1.5 or higher. Not recommended due to thermal limits. ms-7613 ver 1.1 motherboard manual
Q: Can I boot from a USB drive?
Manual answer: Yes – press F11 at POST for Boot Menu. Must set “USB Legacy Support” to Enabled.
The official manual is no longer hosted on MSI’s global front page due to the board’s age, but it is still available through legacy support channels and third-party archives.
Recommended sources for a safe PDF download: Q: Can I use this board with Windows 10
File details to look for:
⚠️ Warning: Avoid “driver download” sites that force you to install EXE files. The manual is a PDF—never an installer.
The ms-7613 ver 1.1 motherboard manual clearly lists the following key specs. Cross-reference these with your components: The official manual is no longer hosted on
| Feature | Specification | | --- | --- | | CPU Support | Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Celeron (LGA775) | | Front Side Bus | 1333 / 1066 / 800 MHz | | Chipset | Intel G41 + ICH7 | | Memory | 2 x DDR3 DIMM slots (max 8 GB, 1066/1333 MHz non-ECC, unbuffered) | | Integrated Graphics | Intel GMA X4500 (supports DirectX 10) | | Expansion Slots | 1 x PCIe x16 (v1.1), 1 x PCIe x1, 2 x PCI | | Storage | 4 x SATA 3Gb/s, 1 x Ultra DMA 100 (IDE) | | Audio | Realtek ALC888S (6-channel HD Audio) | | LAN | Realtek RTL8103EL (10/100 Mbps) | | Rear I/O | PS/2 keyboard, PS/2 mouse, VGA, COM (serial), LPT1 (parallel), 4 x USB 2.0, RJ-45, 3 audio jacks | | Internal Headers | 2 x USB 2.0 (additional 4 ports), 1 x front audio, 1 x serial, 1 x parallel, 1 x CD-in, 1 x system panel (JFP1) |
Crucial takeaway: This board supports only DDR3 (not DDR2). Many users accidentally buy DDR2 and fry their modules.
Press Delete (or F2 on some OEM variants) during POST.