Mitsubishi Multi Communication System Reset
SD Card Issues: Many Mitsubishi models (like the Outlander) rely on an SD card for maps. If the system freezes during the map view:
GPS Location Errors: If a reset does not fix the GPS showing you in the wrong location:
Time and Date Reset: If your MMCS asks for the time and date every time you start the car, the issue is likely a dead CMOS battery (CR2032) on the motherboard inside the unit. A system reset will not fix this; the internal battery needs to be replaced by a technician. mitsubishi multi communication system reset
| Model | Preferred Reset Method | | --- | --- | | Outlander (2014–2021) | Power button hold (15 sec) | | Eclipse Cross (2018–Present) | Menu + Power (10 sec) | | ASX / RVR (2015–2022) | Battery disconnect (for black screen) | | Pajero / Montero (2010–2016) | Engineering reset (Eject+Info+Menu) | | Mirage / Attrage (2014–2020) | Phone pickup + Voice button combo |
There is a massive difference between a "Soft Reset" (restarting the logic) and a "Hard Reset" (factory wiping the memory). Always start with a Soft Reset. SD Card Issues: Many Mitsubishi models (like the
If you cannot access a breaker, or if the system is stuck in "Standby" mode due to a remote conflict, use the remote itself.
This works on the majority of MMCS units (Gen 2 and Gen 3). GPS Location Errors: If a reset does not
A soft reset is a simple restart of the system. To perform a soft reset:
Resetting the Mitsubishi MMCS can resolve many common infotainment and navigation issues. Start with soft resets and power cycles, check SD card and fuses, and use factory reset only when necessary after backing up data. For firmware issues, persistent errors, or hardware faults, consult a Mitsubishi dealer or qualified car audio technician.
Related search terms will be provided.