Martin Lightjockey Fixture Profiles Full

Power users often manually edit .FML files to fine-tune behavior not exposed in the GUI. Example snippet for a generic moving head’s color wheel:

[PARAMETER 4]
Name=Color Wheel
Channel=4
Default=0
Min=0
Max=255
Curve=Linear
Control=Fader
Switch=1
[SWITCH 1]
Name=Color Wheel Positions
0=Open/White
5=Red
10=Green
15=Blue
20=Yellow
25=Magenta
30=Cyan
35=UV
40-47=Color Scroll Slow->Fast
240-255=Random Colors

Run LightJockey on Windows 10 via compatibility mode (Windows XP SP3). Keep your Fixture folder on a cloud drive (Dropbox) so you never lose it again.

Full profiles unlock the Fader (virtual) page. Create faders for "Gobo Rotate Speed," "CTO," and "Zoom." Without a full profile, these parameters are inaccessible from the control surface. martin lightjockey fixture profiles full

LightJockey fixture profiles are not compatible with Martin M-PC, Martin Show Designer, or any third-party DMX software (e.g., GrandMA, Chamsys, QLC+). Each ecosystem uses proprietary profile formats (XML, JSON, or binary).

Below are detailed fixture profiles for Martin LightJockey-compatible fixtures, covering default DMX personalities, channel assignments, value ranges, and common usage notes. This write-up assumes the fixture is used with Martin LightJockey (all versions) and provides concise, actionable information for programmers and operators. If your fixture uses a different DMX personality, consult the fixture manual. Power users often manually edit

Notes: Use 16-bit pan/tilt and dimmer for accurate positioning and fades.

Rare but possible: linking two parameters so moving one moves the other (e.g., master dimmer controlling both dimmer and shutter). Implemented via the [LINK] section manually in .FML. Run LightJockey on Windows 10 via compatibility mode