Juq405 Install ⟶ [PRO]

Use the provided paper template. Drill 6mm pilot holes, insert wall anchors, then screw the JUQ405 base plate.

After the physical install and drivers, you must configure the JUQ405’s operating parameters. juq405 install

Configure Baud Rate: Match the baud rate to your host system. Common settings: 9600, 115200, or 250k (for CAN).

Set Node ID (if multiple JUQ405s): Assign a unique ID from 1 to 247.

Write Configuration: Click "Write to Device" → The JUQ405 will reboot automatically.

Verification: After reboot, the status LED on the JUQ405 should show: Use the provided paper template

Use isopropyl alcohol and the microfiber cloth. Scrub for 30 seconds, then let dry. Any dust or grease will compromise the 3M adhesive’s bond. Configure Baud Rate: Match the baud rate to

This web site is powered by Super Simple Server