Infineon Memtool 49 New May 2026

| Symptom | Likely Fix | |-----------------------------|-------------| | “No device found” | Check power on target, cable, and driver (use Zadig for WinUSB if needed) | | Connection unstable | Reduce JTAG/DAP speed in settings | | Verification error | Check supply voltage, or erase + reprogram | | “Flash algorithm not found” | Update device database (Help → Check for Updates) | | Security bit prevents erase | Unlock via Security tab (requires password) |

If you were searching for MemTool 4.9 or the latest update, the current official release represents a significant leap forward in stability and usability for Infineon MCU development. It bridges the gap between development and production, offering a reliable way to manage Flash memory, User Configuration Blocks, and RAM data.

Infineon Memtool 4.9 is a dedicated Windows-based software for on-chip flash programming, specifically designed for evaluation and production-level tasks like erasing, programming, and verifying flash memory on Infineon microcontrollers

The transition to version 4.9 marked a significant shift in architecture, moving to a full 64-bit software model that no longer supports 32-bit Windows systems. Key New Features in Version 4.9.x 64-Bit Architecture

: Complete migration to 64-bit; cannot be installed on 32-bit systems. Next-Gen Support : Added preliminary support for TC49x A-step DAS Updates : Includes updated Infineon Devices Access Server (DAS)

packages (up to v7.3.7) for improved communication stability. TC3xx Enhancements UCB (User Configuration Block)

programming is now enabled by default for TC3 default config files. configuration to support new mapping entries and SOTA (Software Over The Air) Fixed connection issues with the TC3 ASC bootstrap loader when the SSWWAIT option is active. Hardware Configs : Added default configuration files for the XMC4700 RelaxKit Go to product viewer dialog for this item. and various TC32x/TC33x TriBoards Supported Controller Families

Memtool 4.9 maintains broad compatibility across Infineon's major legacy and modern families: AURIX™ / TriCore™ : Includes TC2xx, TC3xx, and early TC4xx support. XMC™ Series : Full support for Go to product viewer dialog for this item. (XMC1100–1400) and Go to product viewer dialog for this item. (XMC4100–4800) industrial MCUs. : Support for Go to product viewer dialog for this item. Core Functionality Memory Operations infineon memtool 49 new

: Erase, program, verify, and protect selectable flash sections or complete program/data flash areas. File Compatibility : Directly supports opening and writing Intel-Hex-Files to target devices. Interface Options RS232/UART : standard bootstrap loader (ASC BSL) mode. Infineon miniWiggler or onboard wiggler for evaluation boards. Automation : Supports a limited set of batch commands ) for scripted operations. Infineon Developer Center

While Memtool is excellent for evaluation and small-scale tasks, recommends 3rd-party tools from PLS Universal Debug Engine (UDE)

for complex production environments requiring advanced batching or extensive command sets. Infineon Developer Community If you'd like, I can help you: latest download link for the 2025 version. Troubleshoot a specific connection error with your miniWiggler. batch file for automated programming. What is your primary goal for using Memtool today? Infineon Memtool

This story follows Alex, an automotive engineer tasked with updating a prototype Electronic Control Unit (ECU). The goal is to successfully use the Infineon MemTool 4.9

, the latest iteration of Infineon's free on-chip flash programming utility. Infineon Developer Center Chapter 1: The Setup Alex starts by installing MemTool 4.9.0 , noting its shift to a 64-bit only architecture , meaning it no longer supports 32-bit Windows systems. The version includes the Device Access Server (DAS) 7.3.7

, crucial for establishing communication between his PC and the hardware. Alex connects the hardware using an Infineon miniWiggler and launches the application. Infineon Developer Center Chapter 2: Configuration and New Features Alex needs to flash a new AURIX™ TC49x A-step chip. He is pleased to see that MemTool 4.9 now includes preliminary support for this specific device. Target Selection: Target -> Change

and browses to the default configuration files. He finds that direct UCB (User Configuration Block) If you were searching for MemTool 4

programming is now enabled by default for TC3xx devices, simplifying his workflow. Safety First:

He notices a key update intended to prevent the unwanted complete erasure of UCBs, a safeguard that could have previously bricked his device if mismanaged. Chapter 3: The Flashing Process Alex opens his Intel HEX file and prepares to program. He follows these standard steps: Select Communication: He selects the miniWiggler via the DAS interface. and monitors the status bar to ensure a stable handshake. Program and Verify: to write the data, followed immediately by to ensure the flash content matches his source file. Chapter 4: Troubleshooting the "Inactive Bank" Alex later attempts to flash an inactive flash bank for a firmware swap mechanism. He discovers that MemTool 4.9

allow flashing with a direct offset. To solve this, he must manually calculate the offset in his linker script to generate a binary file specifically targeted at that inactive memory region. Infineon Developer Community Conclusion

With the successful verification message, Alex's ECU is ready for testing. He reminds himself that while MemTool is an excellent free tool for development, commercial alternatives like those from PLS Universal Debug Engine are recommended for high-volume production environments. Infineon Developer Community steps or specific DAS configuration Flash inactive bank - Infineon Developer Community 6 Nov 2024 —

Since "Create a text" is a broad request, I have prepared three different types of text you might need:

You can choose the one that fits your needs.

In the rapidly evolving world of embedded systems, the tools used to program, debug, and configure microcontrollers are just as critical as the silicon itself. For engineers working with Infineon’s renowned XC800, XC166, XC2000, and the cutting-edge AURIX™ families, one name has stood the test of time: Infineon Memtool. Infineon Memtool 4

With the release of the latest iteration—referred to colloquially in engineering circles as “Infineon Memtool 49 New” —Infineon has delivered a significant leap forward in non-volatile memory (NVM) programming. But what exactly is new? Why the version number "49," and how does this update change the workflow for embedded engineers?

This article provides a comprehensive review of the new Memtool V4.9, breaking down its architecture, new features, performance benchmarks, and why this "old" tool is being reborn for the "New" age of automotive and industrial IoT.

Before dissecting the "49 New" update, it is vital to understand the tool’s role. Unlike full-blown IDEs like AURIX Development Studio or Tasking, Memtool is a lean, standalone, GUI-based flash programming tool.

Core functions include:

Historically, Memtool was loved for its simplicity and reliability. However, as Infineon pushed into multi-core AURIX TC3xx and TC4x devices, the old Memtool struggled with throughput and complex security configurations. Version 4.9 addresses this head-on.

⚠️ Disable antivirus temporarily if driver installation fails.