A: Yes. The menu text language and the navigation voice language are independent. To change the voice:
Press the "RADIO" or "CD" button to return to normal operation. Your language is now permanently changed.
If you are reading this from your driver’s seat with a German menu staring back at you, here is the bare-bones version:
Done. Your RNS 300 is now in English.
But what if you want another language? Or what if your menu is in French, Italian, or Spanish? Read on for the full, universal guide. how+on+rns+300+change+language+new
⭐ 2.5/5 – The information exists but is scattered. A video guide or photo-based step-by-step would help more than text-only posts. If you have the manual, check page ~20–25. For a “new” unit, the language change process is identical to the original; don’t expect a modern interface.
Would you like a visual step‑by‑step (simulated button sequence) for changing the language on an RNS 300 without seeing the screen?
To change the language on a Volkswagen RNS 300 navigation system, you typically navigate through the hardware buttons to access the internal system settings. While precise menu titles vary by firmware version (e.g., German vs. English), the general workflow involves identifying the "Setup" or "Settings" function. How to Change the Language Enter Setup : Press the button on the unit's faceplate. Access System Settings
: Use the right-hand rotary knob to scroll through the menu options. Look for a term like (in German, look for Einstellungen Find Language Menu : Locate the option (in German, Select Your Language : Scroll to your preferred language (e.g., ) and press the rotary knob to confirm the selection. A: Yes
: Use the "Return" or "Back" button (often indicated by a curved arrow) to exit the menus. Review of the RNS 300 Interface How to change the Language for any car
Here’s a helpful step-by-step guide to changing the language on an RNS 300 (a navigation/radio system found in some older Volkswagen, SEAT, Škoda, and Audi vehicles, like the VW Fox or early 2000s models).
Since the RNS 300 does not have a full touchscreen (it uses buttons and a knob), the menu language is typically changed through the setup menu.
It was a crisp Tuesday morning when Mark bought his used Volkswagen Golf. He was thrilled with the purchase, but there was one glaring problem: the previous owner had been a German expat, and the navigation system (an RNS 315 unit) was stubbornly stuck in Deutsch. If you are reading this from your driver’s
Mark didn't speak a word of German. He needed to get to a meeting across town, but every time he turned on the car, the stereo barked directions at him in a language he didn't understand. He decided it was time to solve the mystery of the "RNS" language barrier.
Here is how Mark changed the language, step-by-step:
A: No. The button sequence for the RNS 300 is unique. For the RNS 310, you press SETUP then the screen button for Language. For the RNS 510, you press SETUP > System > Language. This article is strictly for the RNS 300 (often called MFD2 in some markets).
There are three common hardware limitations:
A: You are selecting “Englisch” (English) but the unit may have a firmware glitch. Try turning the car off, locking the doors, waiting 10 minutes (allowing CAN bus to sleep), and repeating the process.