Hlf1081a — Usb Lan Driver Windows 10 Salwisa

Solution: Disable driver signature enforcement temporarily:

Last updated: May 2026 – Tested on Windows 10 Pro 22H2 and Windows 11 24H2.

If this guide helped you, share it with other Salwisa HLF1081A users. A working driver is just a few clicks away!

HLF1081A USB LAN Adapter is a compact, cost-effective device used to add a 10/100 Mbps Ethernet port to computers lacking a built-in RJ45 jack. While often marketed under generic names or brands like , it primarily uses one of two common chipsets: the Corechip RD9700 Realtek RTL8152 1. Official Driver Identification

Windows 10 typically identifies and installs the necessary drivers automatically upon connection. If it fails to do so, identify your chipset to download the correct driver: Plugable Technologies Realtek Chipset (Most Likely):

Most modern HLF1081A units use Realtek. You can download the "Win10 Auto Installation Program" directly from the Realtek Download Center Corechip/RD9700 Chipset: Hlf1081a Usb Lan Driver Windows 10 Salwisa

Some older or "ultra-cheap" models use the RD9700 chipset. Drivers for this are often hosted on repositories like DriverScape 2. Installation Guide for Windows 10

Follow these steps to manually install or update the driver: Plug in the adapter to an available USB port. Open Device Manager : Right-click the button and select Device Manager Locate the Device

: Look for an item labeled "USB 2.0 10/100M Ethernet Adaptor" or "Other Devices" with a yellow exclamation mark. Update Driver Right-click the device and select Update driver Search automatically for drivers If that fails, choose Browse my computer for drivers

and point to the folder where you extracted the downloaded Realtek or RD9700 files. 3. Troubleshooting Common Issues Device Not Recognized

: Try a different USB port. Some ports may not provide enough power, especially on front-panel USB hubs. Driver Error (Code 10/43) : This is common with the RD9700 chipset on Windows 10. Device Manager Network Adapters Right-click the adapter > Properties Power Management Allow the computer to turn off this device to save power Slow Speeds Solution: Disable driver signature enforcement temporarily:

: Ensure the adapter is plugged into a USB 2.0 or 3.0 port directly, as some older USB 1.1 ports will throttle the speed significantly. Specifications Summary USB 2.0 (compatible with 3.0) 10/100 Mbps (Fast Ethernet) OS Support Windows 7/8/10/11, Linux, macOS Typically Realtek RTL8152 or RD9700 Are you seeing a specific error code

in Device Manager, such as "Code 10," or is the device simply not appearing at all?

Here’s what you can do to find and install the correct driver:

If you have landed on this page, you are likely searching for the correct driver for a device labeled "HLF1081A" , a USB LAN adapter often distributed under the brand name Salwisa. These compact, plug-and-play dongles are essential for laptops or desktops that lack an Ethernet port, providing a stable wired internet connection via USB.

However, a common frustration among Windows 10 users is that the adapter is either not recognized, shows as "Unknown USB Device," or fails to obtain an IP address. This article provides the definitive guide to locating, installing, and troubleshooting the Hlf1081a Usb Lan Driver Windows 10 Salwisa—including official sources, manual fixes, and registry tweaks. Last updated: May 2026 – Tested on Windows

| Feature | Description | |---------|-------------| | Chipset | Likely Realtek RTL8152 or AX88179 (most common for USB 2.0/3.0 Ethernet adapters) | | Interface | USB-A (male) to RJ45 Ethernet | | Speed | 10/100 Mbps (Fast Ethernet) – may be USB 2.0 version | | Plug & Play | Windows 10 usually auto-installs a working driver | | Driver Source | Realtek official drivers or Windows Update | | Use Case | Add wired network port to laptops/desktops without built-in Ethernet |

| Hardware ID | Chipset | Recommended Driver Source | | --- | --- | --- | | VID_0BDA&PID_8152 | Realtek RTL8152B | Realtek official site (USB NIC Drivers) | | VID_0BDA&PID_8153 | Realtek RTL8153 | Realtek official site | | VID_0B95&PID_1790 | ASIX AX88179 | ASIX official site |

For the most common HLF1081A (Salwisa) with Realtek chipset:

Salwisa-specific note: If the adapter came with a mini-CD, do not use it – those discs contain outdated drivers for Windows 7. Always download fresh from the chipset maker.

		Call us now for IT support and free advice
		Call us now for IT support and free advice
Hlf1081a — Usb Lan Driver Windows 10 Salwisa Solution: Disable driver signature enforcement temporarily: Last updated: May 2026 – Tested on Windows 10 Pro 22H2 and Windows 11 24H2. If this guide helped you, share it with other Salwisa HLF1081A users. A working driver is just a few clicks away! HLF1081A USB LAN Adapter is a compact, cost-effective device used to add a 10/100 Mbps Ethernet port to computers lacking a built-in RJ45 jack. While often marketed under generic names or brands like , it primarily uses one of two common chipsets: the Corechip RD9700 Realtek RTL8152 1. Official Driver Identification Windows 10 typically identifies and installs the necessary drivers automatically upon connection. If it fails to do so, identify your chipset to download the correct driver: Plugable Technologies Realtek Chipset (Most Likely): Most modern HLF1081A units use Realtek. You can download the "Win10 Auto Installation Program" directly from the Realtek Download Center Corechip/RD9700 Chipset: Hlf1081a Usb Lan Driver Windows 10 Salwisa Some older or "ultra-cheap" models use the RD9700 chipset. Drivers for this are often hosted on repositories like DriverScape 2. Installation Guide for Windows 10 Follow these steps to manually install or update the driver: Plug in the adapter to an available USB port. Open Device Manager : Right-click the button and select Device Manager Locate the Device : Look for an item labeled "USB 2.0 10/100M Ethernet Adaptor" or "Other Devices" with a yellow exclamation mark. Update Driver Right-click the device and select Update driver Search automatically for drivers If that fails, choose Browse my computer for drivers and point to the folder where you extracted the downloaded Realtek or RD9700 files. 3. Troubleshooting Common Issues Device Not Recognized : Try a different USB port. Some ports may not provide enough power, especially on front-panel USB hubs. Driver Error (Code 10/43) : This is common with the RD9700 chipset on Windows 10. Device Manager Network Adapters Right-click the adapter > Properties Power Management Allow the computer to turn off this device to save power Slow Speeds Solution: Disable driver signature enforcement temporarily: : Ensure the adapter is plugged into a USB 2.0 or 3.0 port directly, as some older USB 1.1 ports will throttle the speed significantly. Specifications Summary USB 2.0 (compatible with 3.0) 10/100 Mbps (Fast Ethernet) OS Support Windows 7/8/10/11, Linux, macOS Typically Realtek RTL8152 or RD9700 Are you seeing a specific error code in Device Manager, such as "Code 10," or is the device simply not appearing at all? Here’s what you can do to find and install the correct driver: If you have landed on this page, you are likely searching for the correct driver for a device labeled "HLF1081A" , a USB LAN adapter often distributed under the brand name Salwisa. These compact, plug-and-play dongles are essential for laptops or desktops that lack an Ethernet port, providing a stable wired internet connection via USB. However, a common frustration among Windows 10 users is that the adapter is either not recognized, shows as "Unknown USB Device," or fails to obtain an IP address. This article provides the definitive guide to locating, installing, and troubleshooting the Hlf1081a Usb Lan Driver Windows 10 Salwisa—including official sources, manual fixes, and registry tweaks. Last updated: May 2026 – Tested on Windows \| Feature \| Description \| \|---------\|-------------\| \| Chipset \| Likely Realtek RTL8152 or AX88179 (most common for USB 2.0/3.0 Ethernet adapters) \| \| Interface \| USB-A (male) to RJ45 Ethernet \| \| Speed \| 10/100 Mbps (Fast Ethernet) – may be USB 2.0 version \| \| Plug & Play \| Windows 10 usually auto-installs a working driver \| \| Driver Source \| Realtek official drivers or Windows Update \| \| Use Case \| Add wired network port to laptops/desktops without built-in Ethernet \| \| Hardware ID \| Chipset \| Recommended Driver Source \| \| --- \| --- \| --- \| \| `VID_0BDA&PID_8152` \| Realtek RTL8152B \| Realtek official site (USB NIC Drivers) \| \| `VID_0BDA&PID_8153` \| Realtek RTL8153 \| Realtek official site \| \| `VID_0B95&PID_1790` \| ASIX AX88179 \| ASIX official site \| For the most common HLF1081A (Salwisa) with Realtek chipset: Salwisa-specific note: If the adapter came with a mini-CD, do not use it – those discs contain outdated drivers for Windows 7. Always download fresh from the chipset maker.