If none of the above apply, the heat is expected.
Your Finether dehumidifier works by pulling warm, moist air into the unit and passing it over cold coils (evaporator coils). This causes the moisture to condense into water droplets, which drip into the tank.
However, to keep the machine running efficiently, the air must then be reheated before it is expelled back into the room. Therefore, the air coming out of the discharge grille will almost always be warmer than the air going in. finether dehumidifier operating instructions hot
Generally, warm air discharge and a warm exterior casing are normal. However, there is a difference between "operating warm" and "overheating."
| Normal Operation | Potential Overheating Issue | | :--- | :--- | | Air blowing out of the top/side is noticeably warmer than room temp. | The unit is extremely hot to the touch (painful to hold hand on). | | The sides of the unit feel slightly warm. | A burning smell (plastic or ozone) is present. | | The unit runs in cycles. | The compressor runs continuously without stopping. | | The "Auto Shut-off" works when the tank is full. | The unit shuts off randomly before the tank is full (thermal cut-out). | If none of the above apply, the heat is expected
Not necessarily. In Auto mode, when the humidity target is reached, the compressor (heat source) turns off, but the fan may still run, blowing room-temperature air.
Finether dehumidifiers are designed to operate within specific temperature ranges (usually between 41°F / 5°C and 95°F / 35°C). Your Finether dehumidifier works by pulling warm, moist
If you see EC and the air is scorching hot with no water in the tank, the refrigerant may have leaked. Stop use and request a replacement.