The order of connection is vital for safety to prevent sparks.
This is the step most people get wrong. Follow the sequence to prevent dangerous sparks near the battery.
For Negative Ground Vehicles (Most Cars): everstart battery charger 60108m manual
For Positive Ground Vehicles (Vintage Cars):
For Batteries Out of the Vehicle:
Without the manual, the blinking lights are confusing. Here is the official guide:
| LED Indicator | Meaning | Action Required | | :--- | :--- | :--- | | Solid Red (Power) | Unit is plugged in and ready. | No action. | | Blinking Green (Charging) | Bulk charging in progress (less than 80%). | Wait. | | Solid Green (Charged) | Battery is fully charged; in float/maintain mode. | Disconnect or leave for long-term maintenance. | | Slow Blinking Red (Clamp Error) | Reverse polarity (clamps on wrong terminals). | Swap the clamps immediately. | | Fast Blinking Red (Bad Battery) | Voltage won't rise above 1.5V; battery has shorted cell. | Replace battery. | | Yellow/Amber Light | Desulfation mode active. | Wait 2-4 hours. If it returns to red, battery is dead. | The order of connection is vital for safety
The EverStart 60108M typically features two charge rates. You must choose the correct one based on your battery’s size:
Tip: If you are unsure, start with the 2 Amp setting to see if the battery accepts the charge, then switch to 10 Amps. If the battery is removed from the vehicle:
A: You can find the official PDF on Walmart’s product support page (search "Everstart 60108") or at Manualslib.com. Always ensure you are downloading the correct model number.