Digi Sm 5000 Scale User Manual -
Q: Can I connect the Digi SM 5000 to a printer or computer? A: Yes, many SM 5000 models have an RS-232 serial port. Use a compatible serial cable and set the baud rate (usually 9600, 8N1) to transmit weight data.
Q: How do I set the auto-off timer?
A: Press and hold UNIT while turning on, then use the numeric keys to enter minutes (0 = no auto-off).
Q: My scale shows “kg” but I need pounds permanently.
A: Enter programming mode (usually MODE + ZERO on startup), find “Unit Selection” (parameter 1.2), and disable kg. Be careful not to alter other settings. digi sm 5000 scale user manual
Q: Where can I download the original Digi SM 5000 user manual PDF? A: Visit the official Digi service website (digi.com/support) or your regional distributor. Search for “SM-5000 Operation Manual rev 3.0”. Many are available as free PDF downloads.
A standout feature of the Digi SM-5000 is its preset keys (often labeled M1–M10). The manual explains how to program these keys with frequently used product codes, tare weights, or unit prices. For instance, a deli counter can program “M1” for sliced turkey at $9.99/lb. The manual provides a programming flowchart: enter unit price → hold the preset key → confirm. It also explains how to recall these presets for rapid weighing and how to overwrite or clear them when prices change. Q: Can I connect the Digi SM 5000 to a printer or computer
| Problem | Likely fix |
|-----------------------|-------------|
| Scale won’t turn on | Check AC adapter / charge battery for 8 hours. |
| Inaccurate weight | Perform calibration (see section 6). |
| “EEEEE” error | Overload – remove weight immediately. |
| “Lo” or battery icon | Recharge or replace battery. |
| Price doesn’t change | You may be in “weigh only” mode – switch to “price computing”. |
| Tare doesn’t clear | Press ZERO after removing all weight. |
The Digi SM 5000 features a tactile membrane keypad with 8-12 primary keys. Here is the standard layout: The Digi SM 5000 features a tactile membrane
| Key Label | Primary Function | | :--- | :--- | | ON/OFF | Turns scale on/off (hold for 2 seconds to power down) | | ZERO | Sets displayed weight to zero (up to 2% or 100% of capacity, model dependent) | | TARE | Subtracts container weight; stores tare value in memory | | M+/M- | Memory accumulation (totalizing weights) | | UNIT | Cycles through weighing units (kg, g, lb, oz) | | COUNT | Switches to parts counting mode | | CHK | Checkweighing (set high/low limits) | | PRINT | Sends data via RS-232 to a printer or PC | | FUNC | Access secondary functions (user-defined) |
Pro Tip: Some SM 5000 models have a backlit LCD with color-coded checkweighing lights (Red = Over, Yellow = Accept, Green = Under).
Press the UNIT or MODE button to cycle through:
Note: Some models lock units based on local legal-for-trade regulations.