Commax Dp-ra01 Installation Manual

Conclusion

The Commax DP-RA01 is a workhorse of audio intercom systems. Its installation is straightforward if you respect polarity, DIP switch addressing, and power supply ratings. By following this guide—which mirrors and expands upon the official Commax DP-RA01 installation manual—you can restore reliable door communication in any home or small building.

If you encounter a problem not listed here, check your connections with a multimeter first. Nine times out of ten, the issue is a loose wire or reversed polarity. Happy installing.

Commax DP-RA01 is a room station handset used in audio doorphone systems, typically paired with a door station (like the DR-2K) to provide two-way communication and remote door release. 華輝電子(集團) 有限公司 Installation & Wiring Guide

Installation involves connecting the room station to the door unit and an optional electric door strike. כומפניקס Mounting the Station Separate the mounting bracket from the handset.

Secure the bracket to the wall at a comfortable height (typically about 1.45m from the floor) using the provided screws. Ensure the product is at least 10cm away from the wall if it generates heat to allow for proper ventilation. Wiring Connections Door Station to Room Station

to connect the door station (DR-2K or similar) to the room station. These are typically non-polar, but check your specific unit's diagram to be sure. Power Source : Connect the AC power cord (available for models like ) to a standard outlet. Door Release (Optional)

: Connect the electric door strike to the dedicated terminals on the room station using 2 wires. Final Assembly Attach the handset to the mounting bracket.

Plug in the power and test the call and door release buttons to ensure the system functions correctly. Technical Specifications Power Source : AC 110V/220V (50/60Hz). Wiring Distance : Effective up to using 0.65Ø copper wire. Dimensions : Approximately 108(W) x 210(H) x 33(D) mm. Magnet Security & Automation Safety Precautions Avoid Wet Hands

: Do not handle the power cable with wet hands to prevent electric shock. Weather Hazards : Do not install the product during lightning or thunder.

: Do not attempt to remove the cover; refer servicing to qualified personnel. For detailed diagrams, you can refer to resources like the Commax Wiring Guide User Manuals from authorized distributors. 華輝電子(集團) 有限公司 wiring diagram

specifically for a master/slave setup with multiple handsets? User Manual

The Commax DP-RA01 is a surface-mounted audio door phone room unit designed for single-house communication. It provides two-way audio communication with a door station and includes a dedicated button for remote door release. 1. Key Specifications Power Source: AC 100V–240V (50/60Hz). Wiring Type: Door Station to Handset: 2-wire connection.

Door Release: 2-wire connection (typically requires a separate power source depending on the lock model).

Mounting Type: Surface-mounted using a wall-mounting bracket.

Connectable Products: Compatible with door stations such as the DR-2G, DR-2K, DR-201D, and DR-2AN. 2. Installation Steps commax dp-ra01 installation manual

The installation requires mounting the bracket and completing the non-polarity wiring between units.

Prepare the Mounting Site: Choose a location away from excessive humidity, direct sunlight, or heat sources. Attach the Bracket:

Secure the provided wall-mounting bracket to the wall using the included screws.

Wire the Door Station: Connect the two wires from the door station to the terminal ports on the back of the . These are generally non-polarity connections.

Wire the Door Release (Optional): Connect the electrical door lock to the designated door release terminals (often terminals 5 and 6) on the room unit.

Mount the Unit: Align the slots on the base of the handset with the hooks on the wall bracket and pull the unit down slightly to secure it.

Power Connection: Once all wiring is complete, plug the power cord into a standard AC outlet. COMMAX DP-2S User Manual | PDF | Electrical Wiring - Scribd

The Commax DP-RA01 is an audio interphone station designed for single-house or multi-unit sub-station use. It features a 2-wire connection to the door station and a 2-wire connection for the door release. Installation & Wiring Guide

Safety First: Ensure the power cord is unplugged before wiring to prevent electric shock. Mounting:

Fix the wall-mounting bracket firmly to the wall using the provided screws.

Align the groove on the back of the DP-RA01 with the bracket and pull it down to secure it. Wiring Connections:

Door Station: Connect two wires from the door unit (e.g., DR-201D or DR-2K) to terminals 1 and 2 on the back of the DP-RA01. This connection is typically non-polar.

Door Release: Connect the electric door-lock to terminals 5 and 6. Note that most door releases require an additional power source (e.g., 12V DC) as they are not powered directly by the handset.

Powering Up: Once all connections are secure, plug the AC power cord (100–240V) into a standard outlet. Key Specifications Power Source AC 100-240V, 50/60Hz Wiring 2 Wires to Door Station / 2 Wires to Door Release Distance wire) or 150m ( Compatible Units DR-2G, DR-2A2N, DR-201D, DR-2K Official Documentation & Resources

Complete PDF Manual: You can view or download the full guide via GDE Polska or browse similar models on Manuals+. Conclusion The Commax DP-RA01 is a workhorse of

Visual Wiring Diagram: A detailed connection diagram is available through technical distributors like WECL.

The Commax DP-RA01 is a 1-to-2 audio doorphone system consisting of a master room station (DP-RA01M) and an optional sub-station (DP-RA01S)

. It typically operates on a 230V AC power source and supports communication with one door station (e.g., DR-2K). GDE Polska Installation Steps Mount the Wall Brackets

Secure the provided metal mounting brackets to the wall at a height of approximately 1.45m to 1.5m from the floor for comfortable use.

Use the bracket as a template to mark and drill the screw holes. Wire the System Door Station to Master

: Connect two wires from the door station (DR-2K) to terminals 1 and 2 on the back of the DP-RA01M master station. Master to Sub-Station (Optional)

: If installing a second handset (DP-RA01S), use a 5-wire connection between the master and sub-station for internal calls and shared door access. Electric Door Lock

: Connect the electric strike or gate control to the designated relay terminals (often marked as 5 and 6 or L1/L2) on the master station. Attach the Handsets

Align the grooves on the back of the handsets with the hooks on the wall brackets. Pull the handset down slightly until it clicks into place. Connect Power

Plug the AC power cord from the master station into a standard 220V/230V outlet.

The sub-station and door station are typically powered directly by the master station and do not need separate power cords. System Configuration & Distance Maximum Distance : 100m using the empty set 0.65 m m copper wire or 150m using the empty set 0.8 m m copper wire.

: The system supports a maximum of 1 door station and 2 indoor stations (1 Master + 1 Sub). GDE Polska Operation Guide How do I install the Commax DP-SS Intercom Audio Phone?

I couldn’t provide the actual Commax DP-RA01 installation manual directly, but here’s a useful, practical review of what you can expect from the manual and the installation process — based on typical Commax door camera/intercom units.

The Commax DP-RA01 is an audio doorphone room station typically installed as part of a single-house intercom system. It is designed for surface mounting and operates on a universal power source of AC 100-240V. Installation Steps | Symptom | Probable Cause | Solution |

Mount the Bracket: Secure the included wall-mounting bracket to a flat surface using the provided screws. Wiring Connections:

Door Station: Connect 2 wires from the door station to the designated terminals on the DP-RA01. This connection is typically non-polarity, meaning the order of the two wires does not matter.

Door Release: If installing an electric door strike, connect 2 additional wires from the DP-RA01 to the door lock. Note that the door release may require its own separate power source depending on the lock type.

Attach the Handset: Align the grooves on the back of the DP-RA01 unit with the hooks on the wall bracket. Slide the unit down firmly until it locks into place.

Power Up: Plug the unit into a standard AC outlet. Avoid handling the power cable with wet hands to prevent electric shock. Compatible Equipment

The DP-RA01 is designed to work with various Commax outdoor door stations, including: Door Stations: DR-2G, DR-2K, DR-201D, and DR-2A2N. Key Specifications Feature Power Source AC 100-240V, 50/60Hz Wiring 2-wire (Door Station), 2-wire (Door Release) Mount Type Surface mount Functions Audio talk with visitor, door release button User Manual

2-wire connection to the door station and 2-wire connection for the door release. Effective Distance:

Up to 50m with 0.65Ø cable to the door station, and 30m to a sub-station. Mount Type: Surface mount. 華輝電子(集團) 有限公司 2. Wiring & Connection Guide

Installation requires connecting the room station to the door unit and an optional electric strike. Room to Door Station:

Use a 2-wire non-polarity cable for communication between the and the door unit (e.g., DR-2G, DR-201D) Door Release (Lock):

The door release function requires a separate power source and 2-wire connection. Intercom Expansion: You can add a sub-unit (

) for internal communication. The maximum configuration is typically one door station and two indoor stations 華輝電子(集團) 有限公司 3. Mounting Instructions Secure Bracket:

Fix the mounting bracket to the wall using the provided screws. Connect Wiring:

Connect the wires from the door station and power source to the terminals on the back of the handset. Attach Handset: Align the grooves on the back of the

with the bracket and slide it down until it clicks into place 4. Basic Operation COMMAX DP-LA01M, LA01S Door Phone User Manual

From the door camera location to the monitor location, run a 4-conductor wire (e.g., CAT5e using 4 cores or dedicated alarm cable). Maximum cable length: 50 meters (164 feet) for proper video quality.