C3560ipservicesk9mz1502se11bin Upd -

From privileged EXEC mode (enable), use the archive download-sw command. This command automatically unpacks (if it were a .tar) and sets the boot variable.

Switch# archive download-sw /overwrite /reload tftp://192.168.1.100/c3560ipservicesk9mz1502se11.bin

What you’ll see:

Loading c3560ipservicesk9mz1502se11.bin from 192.168.1.100 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!
[OK - 13107200 bytes]
extracting info (107 bytes)
Image copied, booting...

Uploading c3560ipservicesk9mz1502se11.bin to a switch requires care. These switches often have limited flash storage (often 32MB or 64MB on older models). c3560ipservicesk9mz1502se11bin upd

reload