Follow these steps exactly, especially if you’ve previously connected the device without a driver.
If you have an Adam-4561 device (industrial I/O/serial module or similar hardware) and need its Windows 10 driver, this guide walks through where to get the correct driver, how to verify compatibility, and step-by-step installation and troubleshooting tips.
Select the Adam-4561 product page from the results.
Click on the “Drivers” tab.
Look for a file named similar to:
Download the latest version (as of 2026, version 2.21 or higher is recommended for Windows 10 22H2).
✅ Alternate official mirror:
If the Advantech site is slow, use their FTP:ftp://ftp.advantech.com/→Products/→Adam-4000-5000/→Adam-4561/→Driver/
Yes. The Windows 10 driver is fully compatible with Windows 11 via the same INF file. Just right-click the installer → Properties → Compatibility → Run as Windows 8/10 mode if needed.
Even with the correct "adam-4561 driver windows 10 download", users face common issues. Here is the fix for each. adam-4561 driver windows 10 download
| Resource | Link / Search Term |
|----------|--------------------|
| Advantech Support | https://support.advantech.com → Search “Adam-4561” |
| Direct driver filename (example) | AdamDriver_Setup_v2.20.00.00.zip |
| Utility tool | Included in driver package (Adam-4561 Utility) |
Last verified: April 2026 – Works with Windows 10 22H2 (build 19045) and Windows 11 24H2.
If you continue to experience issues after following this guide, contact Advantech technical support with the following ready:
This write-up ensures you not only download the correct driver but also successfully deploy and maintain the Adam-4561 in a Windows 10 environment. Select the Adam-4561 product page from the results
To download and install the drivers for Windows 10, follow this guide to ensure your USB to RS-232/422/485 Converter is recognized correctly by your system 1. Identify Your Hardware Version
Advantech has released different hardware versions of the ADAM-4561 (AE, BE, CE), which use different chipsets and require specific drivers. Check the sticker on your device for the exact model name. 2. Download the Correct Driver The most recent version is the ADAM-4561-CE , which typically uses the Silicon Labs CP210x chipset. ADAM-4561-CE (Recommended for Win 10/11): Download the CP210x Universal Windows Driver from the official Advantech Support Portal ADAM-4561-BE
This model uses the Prolific chipset. Drivers for older Windows versions (2000/XP) are available on , but for Windows 10, you may need to use the Prolific PL2303 generic drivers if the legacy ones fail. ADAM-4561-AE
This is an older legacy version (drivers dated circa 2016). Compatibility with Windows 10 is limited; check the ADAM-4561-AE Support Page for legacy files. 3. Installation Steps Click on the “Drivers” tab