Method A (if .msi or .exe provided):
Method B (manual install via .inf):
To get the device working, you need to obtain the software (usually Diagbox version 7.xx or newer).
The actia psa xs evolution 9780z5 driver upd is not merely a technical chore; it is a diagnostic skill that separates professional PSA specialists from hobbyists. A smoothly updated driver ensures that when you plug into a Peugeot 308’s engine ECU or a Citroën C4’s suspension module, you get data—not errors.
By following this guide, you have transformed a potential headache into a structured workflow. Keep your drivers clean, your signature enforcement disabled when needed, and your FTDI firmware genuine. Your ACTIA PSA XS Evolution 9780Z5 will serve you reliably for another decade of PSA diagnostics.
Final Checklist for Success:
Now go diagnose with confidence. Your ACTIA is ready.
Disclaimer: ACTIA, PSA, Peugeot, Citroën, DS, Diagbox, PP2000, and Lexia are trademarks of their respective owners. This guide is for educational purposes. Always use genuine software and drivers.
Actia PSA XS Evolution (Ref: 9780.Z5) is a specialized OBDII diagnostic interface used for Peugeot and Citroën vehicles. It acts as the hardware bridge between a vehicle's ECU and diagnostic software such as Peugeot Planet 2000 (PP2000) Driver & Firmware Architecture
The device is typically recognized in the Windows Device Manager as an " ACTIA USB Device - USB Com Board Driver Driver Evolution
: Modern updates often require the interface to be recognized as an "evolving" driver. This frequently involves updating the bootloader
and serial content (SPI) to ensure compatibility with newer DiagBox versions. Version Check : Firmware versions like APPLI_XS_Fuji_P106138A V4.3.0 are standard for stable communication with DiagBox. Driver Types
: Depending on the specific hardware revision (Basic+, Lite, etc.), drivers may range from version Installation & Update Process
Updating the drivers is usually bundled with the installation of the ACTIAPnPInstaller (Driver Manager) included in diagnostic software packages. Preparation
: Use a 32-bit Windows environment (XP or Windows 7) for older software, though DiagBox 9.85+ supports Windows 10 and 11. Driver Manager ACTIAPnPInstaller
as an administrator to pre-install necessary USB drivers before plugging in the hardware. Hardware Connection
: Once the software is installed, plug the 9780.Z5 into the PC. Windows should automatically detect and assign the "USB Com Board" driver. Interface Checker : Use a utility called PSA Interface Checker
to verify the current firmware version and apply updates if the interface is not "initialized" correctly. System Compatibility & Requirements diag box - French Car Forum
Unread post by moomoo » Tue Apr 26, 2022 10:12 am. Hello, I have the Actia PAS XS Evolution diag box...it is the 9780. Z5 version. French Car Forum Diagbox for Citroen (and how to get swindled)
The Evolution of ACTIA PSA XS: A Driver's Quest for Peak Performance
In the world of vehicle diagnostics and testing, ACTIA is a renowned name. Their PSA XS software has been a trusted tool for technicians and engineers to troubleshoot and optimize vehicle performance. One crucial aspect of this process is the evolution of drivers, specifically the 9780Z5 driver.
The Early Days
In the early 2000s, ACTIA's PSA XS software was already gaining traction among automotive professionals. The software provided a comprehensive platform for diagnostics, calibration, and data analysis. However, as vehicle technology advanced, the need for updated drivers became apparent.
The Birth of 9780Z5
The 9780Z5 driver was introduced as part of ACTIA's efforts to improve compatibility and performance. This driver update enabled technicians to work with a wider range of vehicles, including those with advanced ECUs (Engine Control Units). The 9780Z5 driver quickly gained popularity, as it provided faster communication, improved data accuracy, and enhanced diagnostic capabilities.
Challenges and Limitations
As vehicles continued to evolve, so did the challenges faced by technicians. The 9780Z5 driver, although robust, began to show limitations. Some users reported compatibility issues with newer vehicle models or difficulties with data interpretation. ACTIA's development team listened to feedback and acknowledged the need for further improvements.
The Evolution of 9780Z5
ACTIA responded by releasing updates to the 9780Z5 driver, addressing user concerns and expanding compatibility. These updates included:
The Impact on Technicians and Vehicle Owners
The evolution of the 9780Z5 driver has had a significant impact on technicians and vehicle owners alike:
The Future of ACTIA PSA XS and 9780Z5
As vehicle technology continues to advance, ACTIA remains committed to evolving their PSA XS software and 9780Z5 driver. Future updates are expected to include:
The story of ACTIA PSA XS and the 9780Z5 driver serves as a testament to the importance of continuous innovation and improvement in the automotive industry. As technology advances, the collaboration between developers, technicians, and vehicle owners will remain crucial in shaping the future of vehicle diagnostics and performance optimization.
The ACTIA PSA XS Evolution (9780.Z5) , commonly used for Citroën and Peugeot diagnostics with Diagbox, Lexia-3, and PP2000, requires specific drivers to ensure the VCI (Vehicle Communication Interface) is recognized by Windows. Driver Specifications & Versions
The driver typically identifies the hardware in Windows Device Manager as "USB Com Board Evolution Driver" under "ACTIA USB Devices".
Standard Driver: The standard ACTIA USB Devices Driver (v1.00.00) was originally designed for Windows XP through Windows 7.
Driver Variants: There are two main versions for clone/aftermarket interfaces: UMDF: User-Mode Driver Framework.
Multi-instance: Often cited as the more stable choice for modern operating systems if the UMDF version fails.
Modern OS Compatibility: For Windows 10 and 11, the Basic+ XS / CAT Level X driver (Version 2.9.0.8) is used for standard ACTIA hardware. Update & Installation Procedure
Updating the driver is distinct from updating the internal firmware of the unit. Driver Update Steps: Plug in all ACTIA USB devices.
Run ACTIAPnPInstaller.exe from your software source (often found in the Diagbox installation directory).
Wait for the final confirmation dialog before disconnecting.
Internal Firmware (Interface Checker): The unit's internal firmware can be managed via a tool called Interface Checker. Popular firmware versions like 4.2.4 or 4.3.0 are often required for newer versions of Diagbox (v7.57 or higher) to recognize the hardware. Common Issues Support - ACTIA IME
The ACTIA PSA XS Evolution (9780.Z5) is a professional-grade communication interface (VCI) used for diagnosing and programming Peugeot and Citroen vehicles via software like DiagBox, Lexia 3, and PP2000. Driver Update & Installation Guide
Proper driver installation is critical for the hardware to communicate with your diagnostic software.
Preparation: Ensure you have administrative rights on your PC. It is recommended to use Windows 7 (32-bit) for maximum compatibility, though newer drivers support Windows 10 and 11. Initial Driver Installation: Disconnect the VCI from your computer. actia psa xs evolution 9780z5 driver upd
Run ACTIAPnPInstaller.exe (often found on your installation CD or within the VCI Driver Pack).
Wait for the "Installation Successful" dialog before plugging the USB device back in. Updating Existing Drivers:
Connect the PSA XS Evolution interface to your computer via USB.
Run the same ACTIAPnPInstaller.exe tool. It will detect the hardware and apply the update.
Verification: Open the Windows Device Manager. Under "Universal Serial Bus controllers," the device should appear as "ACTIA USB Devices" or similar without any warning icons. Compatibility & Software Downloads
Operating Systems: Drivers are available for Windows 8, 10, and 11 (both x86 and amd64 architectures) through the ACTIA IME Support Page.
Legacy Systems: If using older versions of Lexia or PP2000, specialized 32-bit drivers may be required for stability.
Safety Tip: Avoid generic driver-updating software. Always use drivers provided by the official manufacturer or reputable automotive forums like French Car Forum to avoid malware or hardware bricking. Troubleshooting Common Issues
Device Not Recognized: If DiagBox cannot see the interface despite drivers being installed, try connecting the VCI after launching the software when prompted.
Clone vs. Genuine: Many units sold are "clones." If your interface has a serial number like 921815C, it may require specific firmware patches to work with newer versions of DiagBox (v9.xx).
Connection Dropping: Ensure you are using a high-quality USB cable and avoid using USB hubs, which can cause communication timeouts during ECU telecoding. Support - ACTIA IME
XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Support - ACTIA IME
XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Support - ACTIA IME
XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Genuine Actia XS not found - French Car Forum
The Actia PSA XS Evolution 9780.Z5 remains the gold-standard interface for diagnosing Peugeot and Citroën vehicles, though managing its drivers and firmware updates can be a technical hurdle for DIYers. Product Overview
The 9780.Z5 is the official VCI (Vehicle Communication Interface) used with Diagbox, Lexia 3, and PP2000 software. It is designed to facilitate deep-level diagnostics, including reading fault codes, live data monitoring, and ECU coding. The Update Experience
Updating this device typically involves two distinct layers:
Driver Installation: Most users rely on the ACTIAPnPInstaller.exe found on support CDs or specialized driver portals. For modern systems, a "Multi-instance" driver is often required over the older UMDF versions to ensure the interface is recognized by Windows 10/11.
Firmware Evolution: The interface often needs to be flashed to specific versions (like 4.3.2) to work with newer Diagbox releases (v7.xx and above). This update often triggers automatically when you first launch Diagbox while connected to the vehicle. Key Performance Insights Pros:
Full Functionality: Unlike generic OBDII scanners, a "Full Chip" version of this interface allows for component activation (e.g., testing fans, wipers) and telecoding (e.g., enabling an Aux port).
Longevity: Well-built units (especially genuine Actia or high-quality clones) can last years and support vehicles from the early 2000s through the 2020s. Cons:
Blacklisting Risks: Older "Reference B" interfaces are often blacklisted by Diagbox software above version 5.29. Users frequently have to use an Interface Checker tool to verify if their unit needs a serial number reflash to "Reference C" for compatibility.
Cumbersome Setup: Installing the accompanying software and its multiple incremental updates is notoriously slow and may require a dedicated 32-bit Windows laptop or a virtual machine. Quick Troubleshooting Tips diag box - French Car Forum Method A (if
The ACTIA PSA XS Evolution (9780.Z5) is a professional-grade diagnostic interface used primarily for Peugeot and Citroen vehicles. Maintaining up-to-date drivers is essential for ensuring compatibility with modern operating systems and modern diagnostic software like Diagbox, Lexia3, and PP2000. Driver Functionality and Support
Drivers for the XS Evolution act as the bridge between the hardware interface (Vehicle Communication Interface or VCI) and the diagnostic software installed on a computer.
OS Compatibility: Current drivers, such as the Level X version 2.9.0.8, support Windows 8, 10, and 11 (both x86 and amd64 architectures).
Official Sources: Official driver updates are typically managed through the ACTIA IME Support portal or integrated within Diagbox software updates. Installation and Hardware Identification
Proper driver installation is critical for the device to be recognized in Windows Device Manager.
Firmware Correlation: When Diagbox (v5.29 or higher) is launched, it often attempts to automatically update the interface firmware (e.g., to version 4.2.4).
Distinguishing Genuine vs. Clone: Users must often identify if their hardware is a genuine ACTIA unit or a "clone," as clones may require specific driver variants (such as "Multi-instance" rather than "UMDF") to function correctly on newer Windows versions. Genuine units typically feature unique serial numbers (e.g., 921815C or 922173A) and specific physical markings like a 6-digit white code on the round plug. Troubleshooting Update Issues Common hurdles during driver updates include:
Driver Not Recognized: If the interface appears with an exclamation mark in Device Manager, manual selection via "Add legacy hardware" may be required.
Communication Errors: Errors often stem from using incompatible USB cables or firmware versions that are too high for the specific software version being used.
Software Integrity: Experts suggest using "Diagbox Cleaning Tools" to remove old registry entries before attempting a fresh driver or software update to avoid conflicts. Support - ACTIA IME
XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ PSA XS Evo driver help | Peugeot Forums
For users of the Actia PSA XS Evolution (9780.Z5) diagnostic interface,
maintaining the correct driver is essential for seamless operation with
. This interface serves as the primary dealer-level diagnostic tool for Peugeot and Citroën vehicles. Driver Availability and Compatibility
Recent updates focus on ensuring compatibility with modern operating systems, specifically Windows 10 Windows 11 (both 32-bit and 64-bit). Official Drivers : The latest driver versions, such as Version 2.9.0.8 (for Basic+ XS) and Version 2.9.0.0 (for Lite XS), are available through ACTIA IME Support PSA VCI Driver
: Many newer Diagbox installations (like version 9.85 or 9.91) require a standalone PSA VCI Driver
to be installed as an administrator to detect the hardware properly. Firmware Requirements
: For full functionality with Diagbox 7.xx and higher, the adapter often requires Firmware 4.3.2
(Reference "C"). This firmware typically updates automatically upon launching the Diagbox software for the first time. Key Installation Steps Support - ACTIA IME
XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/
It looks like you're looking for guidance on updating a driver for the ACTIA PSA XS Evolution 9780Z5 — a diagnostic interface used for PSA vehicles (Peugeot, Citroën, DS, Opel, etc.).
Below is a step-by-step guide to update the driver on Windows 10/11.
The 9780Z5 is aging, but it remains potent. After your driver update, consider these advanced tweaks: Method B (manual install via
Search engines show thousands of queries for this specific driver update. Why is it so problematic?