Cart 0
Cart 0

4g-lte-5m-h07-c03-mv2.250 -

  • Antenna placement (when 5m lead present)

  • Grounding and lightning protection

  • Power and thermal considerations

  • Firmware and configuration

  • SIM and carrier provisioning

  • Low throughput:
  • Frequent disconnects:

    • The final segment “mv2.250” is the most speculative. Parsing possibilities:

    In European motor naming conventions, “MV” can denote a specific motor series (e.g., Siemens MV industrial motors). “2.250” would then be the power rating in kilowatts. A 2.25 kW motor is common for small conveyors, pumps, or fans. 4g-lte-5m-h07-c03-mv2.250

    Another reading: mv = moving coil (e.g., moving-coil relay or actuator) with 2.250 V control signal. However, “mv” in lowercase often means millivolts in scientific notation, but “2.250” as millivolts (2.250 mV) would be far too low for industrial control.

    Given the presence of “4g-lte,” “5m,” and “h07,” the most coherent interpretation is:

    A remote monitoring setup: a 4G LTE telemetry unit connected via a 5-meter H07RN-F rubber cable to a motor variable controller (MV) with a power rating of 2.250 kW, located at connector/port C03. Antenna placement (when 5m lead present)

    If one were to draft a datasheet for this assembly, it might read:

    | Parameter | Value / Specification | |----------------------------|---------------------------------------------------| | Assembly type | Hybrid 4G/LTE antenna feed + power/control cable | | Length | 5 meters (±0.1 m) | | RF section | Coaxial, 50Ω, up to 3 GHz | | RF connector, device end | SMA male, 0.250"-36 thread (.250) | | RF connector, modem end | RP-SMA or N-type (depends on variant) | | Power/Control section | H07-style, 3 conductors (C03), 1.5 mm² Cu | | Voltage rating | 450/750V AC / 750V DC | | Current capacity | 16A (installed) | | Insulation material | EPR (Ethylene Propylene Rubber) - MV2 compound | | Outer sheath | Black, chloroprene (CR), oil & UV resistant | | Temperature range | -40°C to +90°C | | IP rating (mated) | IP67 (with optional sealing gland) | | 4G/LTE band support | B1, B3, B7, B8, B20, B28, B40 (700-2600 MHz) | | Insertion loss @ 2.5 GHz | < 2.5 dB (RF path only) | | Return loss (VSWR) | > 14 dB (VSWR <1.5:1) @ modem connector | | Application | Remote LTE gateways, mobile base stations, industrial IoT |